Thread: Test BillBoost

Top and Red.. I'm no hero. Merely a guy that in his 20's had a few humbling things happen that made me realize, no one is perfect, we are all gonna croak, and if we allow it.. we can learn until the day we die.

You may notice I post in almost every thread where there is a problem. I read almost every thread on 4-5 forums. (thank you work for not blocking them). This helps give me a lot of insight into things. Yet, there's guys like 2003 SSEi and Intrigue98 that have read even more and have tons and tons of knowledge about the 3800. They tend to be quiet, a bit reserved you could say.

well thanks for being a contributing member, youve answerd alot of my questions, while answering someone elses

Cool...now toss something at me. Or I'll post up another check your knowledge thread

Originally Posted by BillBoost37

From this angle, and it's not that parts best side...lemme tell you. And no sizing reference.....

It kinda looks like a burnt out exhasust crossover donut. It's too perfectly round in shape to have been a beat to hell exhaust rubber o-ring. Looks to big to be any other o-rings.

Well, if I took a side pic, you would recognize it immediately. You would have been able to see the serpentine belt grooves. Plastic stock idler pulley! Bearing seized and melted out the entire center leaving only the outer ring. Plastic-not-so-fantastic.

ok i'll give you one

Sweet, my favorite thread ever. I shall stump you! But I hope not lol I really would like to know what these are! > and where they go

Originally Posted by fri3dchick3n

Sweet, my favorite thread ever. I shall stump you! But I hope not lol I really would like to know what these are! > and where they go

This is aftermarket but since this is Bill's thread I will give him time to answer this.

F3.. they look like plastic air diverters off a bike or quad. If they are from a car, can I get another pic with something for reference of size, maybe another angle.

Keith nailed it. The aftermarket alarm/starter box is right next to it. The first two pics are an extra harness and it's wires that arent' connected. The third is a factory connector... need a better idea of where that is and what year/model your car is.

Originally Posted by BillBoost37

F3.. they look like plastic air diverters off a bike or quad. If they are from a car, can I get another pic with something for reference of size, maybe another angle.

holy **** guy. your almost spot on. they go behind the headlights inside the front faring on an 07 honda cbr 600 rr.

Looks a lot like a deflector on my 660 Grizzly. Seeing as how you have the bike in your sig...i took a shot.

People that don't like huds are just strange.

Keep the stuff coming. Someone take a bolt off their motor of their car..I'll see if I can tell ya where it goes.

C'mon folks..stop being a bunch of goobers and not taking a pic of a bolt or something... Let's see what you got!

thanks..but I was alive in the 80's. Now go drive 88mph and watch some serious **** happen.

alright lets see if you know what these are, They don't go on a w-body that I know of all I know is they are basicly the strongest bolts out there and I got them cleaning out a garage from a dead relative that died and worked for gm his whole life and basicly he had a huge collection of stuff he pocketed from work and brough home.





I also found a ton of taps lol

I admit, most of my knowledge is from the 3800 platform. Those have more marks than a 10.9 which is about the strongest bolt we typically find on our stuff.

You sir..have a strong bolt there.

Originally Posted by BillBoost37

I admit, most of my knowledge is from the 3800 platform. Those have more marks than a 10.9 which is about the strongest bolt we typically find on our stuff.

You sir..have a strong bolt there.

yea I got like a 20lb bag of them I have no Idea what I'll ever use them for lol but heres another one for you its pretty easy but maybe someone will learn from it

I know this one.. its a blurry picture.

correct that it is... Its the filter seal in the gasket and a Note to everyone If it doesn't fall out don't mess with it cause then you will end up spending an extra hour cutting the thing out... so just re use the one in there when ou change your filter lol