|
|
04-07-2011
Im trying to replace a rear hub assembly on a 97 GTP Ive removed the caliper and rotor. took off the parking brake cable and removed the 4 bolts, but i cant for the life of me get that thing outta there. Does anyone have any suggestions am I missing something? Thanks for your time I really appreciate it.
04-07-2011
Take a look at the back of it. The parking brake bracket has two small, likely rusted bolts holding the bracket to the hub.
Been there..fought that. Best suggestion is if they are rusted to heck, grind the heads, then go to the hardware store and get two new little bolts. I think they are M6 x 1.00 or M4 x 1.00
04-07-2011
Some WD-40 and an RPG.
04-07-2011
I had to air chisel mine out when I replaced the ones in my 04.
04-25-2011
I got mine out by hitting the side of the bearing with a giant hammer. Probably not the ideal way to do it, but I didn't feel like screwing with it for 3 days.
04-25-2011
some heat and a BFGH
04-25-2011
x4...Originally Posted by techweenie
04-26-2011
Guys..it's easy if you remove all the bolts.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
