Recent Header Group Buy

ohh mine are done.... i got mine in... but i will tell u right now to send urs back.. it took me 3 hours of mock fitting,cutting and welding to get it just right....see the front header where the 3 pipes meet...that needs to be angled up about 3 inches to make it over the trans... what i did was welded 3 inches of pipe on it to shoot it up and overthe trans...then on the cross over part i weld another pipe on it with a hook shapped bend to make it go over the trans and under my air intake...and i had to use a buddys pipe bender to bend the pipe a hair to move around the trans dip stick... i almost weld the y collector FIRST to the back mani..then put the back mani in..then the cross over to the y pipe... then the put on the front mani..its ALOT easier to get to the back side if u undo the 2 front motor mounts..and put a piece of wood on a jack and jack up the back side of ur trans to tilt/ push ur engine forwards....if you want send me ur headers and ill weld the pieces they need on ur front mani and ur downpipe... i still have my mock ups..let me know...but i wont pay for shipping to u

or your in montgomary... i can meet you

Can you post some pics of it??

yea i will tom. i took them on my cell phone and its charging right now... i will post tom

Do it now!! lol

ok hold on

Quote:

---

Originally Posted by killakross5o4

ohh mine are done.... i got mine in... but i will tell u right now to send urs back.. it took me 3 hours of mock fitting,cutting and welding to get it just right....see the front header where the 3 pipes meet...that needs to be angled up about 3 inches to make it over the trans... what i did was welded 3 inches of pipe on it to shoot it up and overthe trans...then on the cross over part i weld another pipe on it with a hook shapped bend to make it go over the trans and under my air intake...and i had to use a buddys pipe bender to bend the pipe a hair to move around the trans dip stick... i almost weld the y collector FIRST to the back mani..then put the back mani in..then the cross over to the y pipe... then the put on the front mani..its ALOT easier to get to the back side if u undo the 2 front motor mounts..and put a piece of wood on a jack and jack up the back side of ur trans to tilt/ push ur engine forwards....if you want send me ur headers and ill weld the pieces they need on ur front mani and ur downpipe... i still have my mock ups..let me know...but i wont pay for shipping to u

---

Might just meet you. How are they after you installed them? Pics would be awesome when you get a chance. If I can modify them to work with some help might be worth the 180 bucks still. Did you wrap yours?

i wrapped everything but the front mani fold cuz i was to lazy to wrap it cuz all the pipes are close together...but i ended up unwrapping my cross over cuz i had to mod it and mock it up so i just took it off..but yes i did wrap it... i used the stock gaskets..which i plan on replacing here soon cuz i total forgot to grab them out my other car after i had my stock mani off..so i just re used it... i will make u a sweet deal tho...pm me and here are the photos..its ugly but it works with NO LEAKS

photos

ahhh u posted at same time i did... i was bout to say pic fail..

in the 2 photo u can see how it goes under the air intake and over the trans by a good 2-3 inches..that is the main prob is the headers they gave us run into the trans..like the trans is in the way so it wont let u connect the pieces...the photos make it look like cake but i swear it was hell..but ya i got my mock up angles and designs if need be

aint no fail...**** take a look brother i MADE THEM FIT

Quote:

---

Originally Posted by killakross5o4

pm me and here are the photos..its ugly but it works with NO LEAKS

---

u misunderstood me... there were no pics in this post... then u posted right after this with pics.

yea i was confused...but i understand u now...so about this hood i got stiffed on...found another buyer but he wants 600 plus shippin

I like the ssacs they are better in my book

i'm curious to see DNA's response to this. someone post that for me, would you? that is if you ever hear from them.

Quote:

---

Originally Posted by killakross5o4

photos

---

You used flux core welder? Not stainless?

lol yes i used flux core...all my buddy had.....is that not good? and dna e mailed me saying they will pay for return shipping

Quote:

---

Originally Posted by killakross5o4

dna e mailed me saying they will pay for return shipping

---

fixed

Killa, you should sell dna your mock-up designs so they can fix these pieces of crap lol. If they will pay for return shipping I MIGHT be willing to wait for them to get the ssac KO's back and exchange these...