JB Weld will fix her right up! j/k...well get a gasket on there before it gets worse then!
Printable View
JB Weld will fix her right up! j/k...well get a gasket on there before it gets worse then!
could be. i had the Pontiac Dealership replace the Coolant Elbow last monthQuote:
Originally Posted by matt5112
and they said my LIM needed to be replaced when they Pressure tested the system.
yea, the gaskets are junk so thats definetly your problem
thisQuote:
Originally Posted by Pittman06
keep in mind the dealer will put a brand new blower or have the whole thing rebuilt before they would change the coupler. :)
looks good
need to find my drill battery so i can install my frnt stb
and my a/c comp delete pulley should be here this week
replaced all my plastic pulleys with metal ones
and am putting posi in my crown vic
I also need to get a Heating core in my GTP
The last Asshat Bypassed it so im assuming the one i have is FUBAR.
and I intend on replacing all the Gaskets while the Engine is out anyway.
But speaking of Repairs Does anyone know where the FUSE for the Check engine Light Reader is.
I went to auto zone and they told me they can't read my code until i replace that fuse.
And I couldnt find it in/under the dash and its not in the Fusebox thats near the S/C
Anyone?
The check engine light reader is the device you plug into the port... perhaps you mean the OBDII port?
it should be the cig lighter fuse.
I know that its the same fuse as the Cig LighterQuote:
Originally Posted by rolyat
but WHERE is the damn fuse!
anyone know the location of that fuse?
='[
I think its behind a piece of plastic trim when you open the glove box. thats where the only other fusebox I know of is, at least thats where it is on my 2000. Im not sure if the cig lighter fuse is in there but it has to be in one of the two.Quote:
Originally Posted by Spartangl
Quote:
Originally Posted by Spartangl
Installed my all my poly/solid motor mounts, and will be installing new brakes, and throwing a set of NGK TIR6 plugs in tomorrow, or Thursday.
Take your engine cover off.
JB Weld is the DEVIL
Quote:
Originally Posted by KawaFord
Never! I fight for my Freedom to WEAR MY ENGINE COVER!
i shall check it!Quote:
Originally Posted by rolyat
That's what I keep telling her! LOLQuote:
Originally Posted by rocafella2032
Dude, your trapping in a lot more heat then you'd think.Quote:
Originally Posted by Spartangl
I found the Fuse!
15A Glovebox.
:)
and sure enough Blown!
Good to hear!
Not quite you didn't :th_king-normal:Quote:
Originally Posted by 01GTP