where do i tap into with this also does any1 run this now?

[GTPJOE90]

AutoZone.com | 2 1/16 in. 0 to 100 PSI White Face Ultra-Lite Electric Oil Pressure Gauge Includes 1/4 in. NPT Adapter Fitting and 1/8 in. NPT Sender Air-Core Meter Movement | 2 1/16 in. 0 to 100 PSI White Face Ultra-Lite Electric Oil Pressure Gauge I

i can get 1 from a friend for half the price and this will complete my pod and oil pressure is good to know so is anybody currently running this ELECTRIC oil gauge? if so where do i tap into at? thanks

OHHH AND FYI WE GOT THE NEW ENGINE AND ITS ON THE HOIST RIGHT NOW TOMARROW OR FRIDAY NIGHT I GOT MY CAR BACKK FINGERS CROSSED

[Bio248]

make a T-fitting off the oil filter neck where the plug goes for the dummy light. leave that on one end of the T and then plug the sending unit into the other side of it. run the wire into the cabin and then to the gauge.

you cannot hook up the gauge anywhere in the vehicle wiring and get a usable signal.

[GTPJOE90]

thats what i was figuring damn well thanks bio