Thread: aftermarket spoiler at junkyard...

Page 1 of 3 123 LastLast
Results 1 to 20 of 50
  1. #1 aftermarket spoiler at junkyard... 
    GTX Level Member
    Join Date
    Dec 2007
    Posts
    1,326
    Thanks (Received)
    4
    Likes (Received)
    3
    Dislikes (Received)
    0
    so my friend and i went to the nearby junkyard for anything/nothing for our cars. i found a green coupe L36 and noticed it had an aftermarket spoiler that resembles the C-west spoiler with the center brake light on it.
    unfortunately the clear coat was nastly peeling off of it and the junk yard wanted $65 for it since its an aftermarket type. i was thinking about getting it, but the cost to get it all repainted and clear coat i'd be looking at between 300-400 to get it professionally done. just thought if anyone liked or disliked them and if i should get it or not
    old setup-Z7 Turbo Kit w/T66, A2A I/C, stock cam & valvetrain/LS1 MAF/Ported 99TB/PowrTuner/AFC/Devils Own/LS1M Scanner/PRJ FP/42# Injs=12.3@118mph street tires -
    (Sold)BACK TO M90 Vs cam w/3.5" pulley/meth/25* timing+bolt-ons
    01 Z28 A4 HP-self-tuned, LTs, FTRA, 3600stall 12.3@112mph
    Reply With Quote  
     

  2. #2 Re: aftermarket spoiler at junkyard... 
    GrandPrix Junkie
    Join Date
    Jan 2008
    Location
    Saraland Alabama
    Posts
    3,373
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    that yard does stuff backwards, most yards when it's aftermarket either scrap it, or sell it cheap, as they know they cost less than factory stuff usually
    Reply With Quote  
     

  3. #3 Re: aftermarket spoiler at junkyard... 
    GTX Level Member
    Join Date
    Dec 2007
    Posts
    1,326
    Thanks (Received)
    4
    Likes (Received)
    3
    Dislikes (Received)
    0
    well i can try to negotiate to lower the price, but whats a good price range to give them?
    old setup-Z7 Turbo Kit w/T66, A2A I/C, stock cam & valvetrain/LS1 MAF/Ported 99TB/PowrTuner/AFC/Devils Own/LS1M Scanner/PRJ FP/42# Injs=12.3@118mph street tires -
    (Sold)BACK TO M90 Vs cam w/3.5" pulley/meth/25* timing+bolt-ons
    01 Z28 A4 HP-self-tuned, LTs, FTRA, 3600stall 12.3@112mph
    Reply With Quote  
     

  4. #4 Re: aftermarket spoiler at junkyard... 
    GXP Level Member ryangtp89's Avatar
    Join Date
    Dec 2007
    Location
    Maine
    Posts
    2,082
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Id give them a fifty dollar bill, yea i think they look good myself.
    SLP headers, Wizaird cai, zzp1.0pcm ,slp powerflo catback, 3.4mps, NGK TR55's, 180*, zzp stage 1 hv tb,tb spacer, tb heatshield, Triple Edge Performance High performance Tranny, flipped motor mounts, spring blockers, prj 10.4mm wires, Sloted rotors & Ceramic brake pads,Alternator Voltage Booster. zzp 1.9 rockers & 105# springs
    Reply With Quote  
     

  5. #5 Re: aftermarket spoiler at junkyard... 
    GTP Level Member Toasty's Avatar
    Join Date
    Jan 2008
    Location
    SW Chicago Suburbs
    Posts
    1,522
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    the wings west ones were pretty expensive, IIRC so unless its definitely not one, doesnt seem like a bad price.
    Reply With Quote  
     

  6. #6 Re: aftermarket spoiler at junkyard... 
    GTX Level Member
    Join Date
    Dec 2007
    Posts
    1,326
    Thanks (Received)
    4
    Likes (Received)
    3
    Dislikes (Received)
    0
    pretty sure it looked like this but forest green and clear-coat peeling
    old setup-Z7 Turbo Kit w/T66, A2A I/C, stock cam & valvetrain/LS1 MAF/Ported 99TB/PowrTuner/AFC/Devils Own/LS1M Scanner/PRJ FP/42# Injs=12.3@118mph street tires -
    (Sold)BACK TO M90 Vs cam w/3.5" pulley/meth/25* timing+bolt-ons
    01 Z28 A4 HP-self-tuned, LTs, FTRA, 3600stall 12.3@112mph
    Reply With Quote  
     

  7. #7 Re: aftermarket spoiler at junkyard... 
    GXP Level Member Zef_66's Avatar
    Join Date
    Dec 2007
    Location
    PA
    Posts
    2,084
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by fst View Post
    pretty sure it looked like this but forest green and clear-coat peeling
    Is it like Allen K has on his car?
    2001 GSE
    Reply With Quote  
     

  8. #8 Re: aftermarket spoiler at junkyard... 
    GTX Level Member
    Join Date
    Dec 2007
    Posts
    1,326
    Thanks (Received)
    4
    Likes (Received)
    3
    Dislikes (Received)
    0
    Quote Originally Posted by Zef_66 View Post
    Is it like Allen K has on his car?
    i 'think' so, i honestly cant remember. im getting senile in my age already lol
    old setup-Z7 Turbo Kit w/T66, A2A I/C, stock cam & valvetrain/LS1 MAF/Ported 99TB/PowrTuner/AFC/Devils Own/LS1M Scanner/PRJ FP/42# Injs=12.3@118mph street tires -
    (Sold)BACK TO M90 Vs cam w/3.5" pulley/meth/25* timing+bolt-ons
    01 Z28 A4 HP-self-tuned, LTs, FTRA, 3600stall 12.3@112mph
    Reply With Quote  
     

  9. #9 Re: aftermarket spoiler at junkyard... 
    Donating Users Pontiac1's Avatar
    Join Date
    Jan 2008
    Posts
    19
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    hm, im not a big fan but maybe thats cause i saw one on a piece of junk ant eater SE w/ the 3rd light dangling down.....
    SLP headers, Gen V, Full size IC, XPZ!!
    Reply With Quote  
     

  10. #10 Re: aftermarket spoiler at junkyard... 
    GT Level Member DuBob's Avatar
    Join Date
    Dec 2007
    Location
    Lititz, PA
    Posts
    242
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Ya, Allen K has the Wings West Spoiler. To install that on our cars requires the stock spoiler holes to be filled in and the trunk has to be repainted. In the end, it's a pretty darn expensive spoiler when you add in all the work that's needed to put it on the car.
    One of the First: 2008 Liquid Red Pontiac G8 GT (hers)
    -Intake, Tune, Magnaflow Exhaust, 40% tint.
    -Next: Rims, lowered?, headers?

    One of the Last: 2009.5 Stryker Blue Metallic Pontiac G8 GXP M6 (mine)
    -Intake, Magnaflow Exhaust, 25% tint.
    -Next: Headers and tune.
    Reply With Quote  
     

  11. #11 Re: aftermarket spoiler at junkyard... 
    GTP Level Member GTPluv's Avatar
    Join Date
    Dec 2007
    Location
    Enid,Ok
    Posts
    1,388
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    You need a friend in the autobody buisness. I have 2. One said he would re-do my clearcoat for free(spoiler). The other did all the body work & paint on my TA when it got hit for $600 less. He had it for a week in his garage. Worked on it at night. That was okay though cuz I had other cars to drive. You all really need to be closer to me.
    Reply With Quote  
     

  12. #12 Re: aftermarket spoiler at junkyard... 
    GTP Level Member David99GTP's Avatar
    Join Date
    Jan 2008
    Location
    Florida
    Posts
    929
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I have to get my car into the shop. I just installed an 03 limited edition spoiler and the stock spoiler cut into the paint bad.
    1999 GTP
    2002 Chevy 2500HD lifted on 36" Swampers
    http://www.cardomain.com/ride/2619487
    Reply With Quote  
     

  13. #13 Re: aftermarket spoiler at junkyard... 
    GTP Level Member Toasty's Avatar
    Join Date
    Jan 2008
    Location
    SW Chicago Suburbs
    Posts
    1,522
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by DuBob View Post
    Ya, Allen K has the Wings West Spoiler. To install that on our cars requires the stock spoiler holes to be filled in and the trunk has to be repainted. In the end, it's a pretty darn expensive spoiler when you add in all the work that's needed to put it on the car.

    or find an early 97 lid that didnt have a factory spoiler
    Reply With Quote  
     

  14. #14 Re: aftermarket spoiler at junkyard... 
    Donating Users Curtis's Avatar
    Join Date
    Jan 2008
    Location
    Missery
    Posts
    572
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by DuBob View Post
    Ya, Allen K has the Wings West Spoiler. To install that on our cars requires the stock spoiler holes to be filled in and the trunk has to be repainted. In the end, it's a pretty darn expensive spoiler when you add in all the work that's needed to put it on the car.
    been there, done that, $100 for trunk lid, shaved and repainted $250, spoiler $250 shipped (new) total... priceless!
    Reply With Quote  
     

  15. #15 Re: aftermarket spoiler at junkyard... 
    GTX Level Member LowlyfeGTP's Avatar
    Join Date
    Dec 2007
    Location
    Janesville, WI
    Posts
    900
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I had the WW spoiler on my original 98 GTP. I loved it. I swapped an SE trunklid plus cash for my GTP trunklid/spoiler in the same color, so it saved me big.

    My 98 GTP with WW


    SoLo GTP with WW spoiler
    Jason Klingaman
    LOWLYFE
    99 GTP Silvermist Coupe
    360 vid
    Reply With Quote  
     

  16. #16 Re: aftermarket spoiler at junkyard... 
    GTX Level Member
    Join Date
    Dec 2007
    Posts
    1,326
    Thanks (Received)
    4
    Likes (Received)
    3
    Dislikes (Received)
    0
    well the wing was still mounted to the trunk, so if the deal's right i might just get both trunk lid and spoiler pending the price. i may just get them repainted at like maaco or something for the price(sorry dubob!!) and apply since i hear maaco doesnt apply clearcoat, is it possible for me to add it myself or is that a big nono?
    old setup-Z7 Turbo Kit w/T66, A2A I/C, stock cam & valvetrain/LS1 MAF/Ported 99TB/PowrTuner/AFC/Devils Own/LS1M Scanner/PRJ FP/42# Injs=12.3@118mph street tires -
    (Sold)BACK TO M90 Vs cam w/3.5" pulley/meth/25* timing+bolt-ons
    01 Z28 A4 HP-self-tuned, LTs, FTRA, 3600stall 12.3@112mph
    Reply With Quote  
     

  17. #17 Re: aftermarket spoiler at junkyard... 
    GTP Level Member Toasty's Avatar
    Join Date
    Jan 2008
    Location
    SW Chicago Suburbs
    Posts
    1,522
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by fst View Post
    well the wing was still mounted to the trunk, so if the deal's right i might just get both trunk lid and spoiler pending the price. i may just get them repainted at like maaco or something for the price(sorry dubob!!) and apply since i hear maaco doesnt apply clearcoat, is it possible for me to add it myself or is that a big nono?

    depending on what paint package you get from maaco will determine weather or not you get clear coat.

    that being said, i'd see if there are any other local smaller shops around that you could check with. I dont know if i'd trust maaco to strip and paint the wing properly.
    Reply With Quote  
     

  18. #18 Re: aftermarket spoiler at junkyard... 
    I live here. UR LOSN's Avatar
    Join Date
    Dec 2007
    Location
    Rockford, IL
    Posts
    5,796
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    personally I dont like that spoiler......but if it is a good deal....dont pass it up.
    2001 GTP- PT76 turbo, Intense Drag cars old engine, Stage 4 Intense turbo cam,FMIC,150 wet,Double roller timing chain,Diamond forged coated pistons 8:0:1,Diamond piston rings,Cryoed L32 connecting rods,Cryoed crank,Clevite77 main bearings,Clevite77 cam bearings,Clevite77 L32 rod bearings,ARP Everything, Intense/meizere true billet Flexplate,Intense Wilson UIM/LIM,Intense oil pressure kit,Cometic,OE-R lifters,Cryoed L67 block,ATI turbo dampner,80# inject,Weldon 2035 fp,Aero Fuel Rails,AL cradle
    Reply With Quote  
     

  19. #19 Re: aftermarket spoiler at junkyard... 
    GT Level Member DuBob's Avatar
    Join Date
    Dec 2007
    Location
    Lititz, PA
    Posts
    242
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Freeman, check steelseductions at GTPowderworks old garage.......he does good work and is very reasonable.
    One of the First: 2008 Liquid Red Pontiac G8 GT (hers)
    -Intake, Tune, Magnaflow Exhaust, 40% tint.
    -Next: Rims, lowered?, headers?

    One of the Last: 2009.5 Stryker Blue Metallic Pontiac G8 GXP M6 (mine)
    -Intake, Magnaflow Exhaust, 25% tint.
    -Next: Headers and tune.
    Reply With Quote  
     

  20. #20 Re: aftermarket spoiler at junkyard... 
    GTX Level Member
    Join Date
    Dec 2007
    Posts
    1,326
    Thanks (Received)
    4
    Likes (Received)
    3
    Dislikes (Received)
    0
    awesome, i didnt know that. i'll ask around for his number then. thanks dave
    old setup-Z7 Turbo Kit w/T66, A2A I/C, stock cam & valvetrain/LS1 MAF/Ported 99TB/PowrTuner/AFC/Devils Own/LS1M Scanner/PRJ FP/42# Injs=12.3@118mph street tires -
    (Sold)BACK TO M90 Vs cam w/3.5" pulley/meth/25* timing+bolt-ons
    01 Z28 A4 HP-self-tuned, LTs, FTRA, 3600stall 12.3@112mph
    Reply With Quote  
     

Page 1 of 3 123 LastLast

Similar Threads

  1. my new hood and spoiler!
    By kyle99gtp in forum General Tech Discussion
    Replies: 40
    Last Post: 04-18-2008, 10:47 PM
  2. What aftermarket convertor do you run?
    By my97gtp in forum 1997-2007 4 speed Automatic (4T65E) (4T65E-HD)
    Replies: 8
    Last Post: 01-03-2008, 12:20 PM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •