Thread: Attention: Chris Hinson/Bully Flo!!

Page 6 of 9 FirstFirst ... 45678 ... LastLast
Results 101 to 120 of 171
  1. #101 Re: Watch out for Chris Hinson and Bully Flow Heads!! 
    GXP Level Member
    Join Date
    Mar 2015
    Location
    Tomball
    Posts
    2,633
    Thanks (Received)
    0
    Likes (Received)
    3
    Dislikes (Received)
    0
    Chats
    2843
    I have a question. Do you own or do you flow each set of heads you do?
    An engine is an engine no matter the size.... I think Dr. Seuss said that... or maybe it was Big Weld....
    Reply With Quote  
     

  2. #102 Re: Watch out for Chris Hinson and Bully Flow Heads!! 
    The Boss Iceman6669's Avatar
    Join Date
    Jun 2011
    Posts
    7,476
    Thanks (Received)
    8
    Likes (Received)
    38
    Dislikes (Received)
    0
    Chats
    74278
    Quote Originally Posted by OrangeL67 View Post

    Andrew Schnicke LQ4: ran 9's with my heads and was able to gain 200 whp after turning up his boost which the heads allowed him to do.

    If I'm correct this is true, except that I believe Andrew also made other changes like a better turbo.



    I AM THE GEATESTEST...
    97 GTP Sold-prolly rusted away by now
    2011 F-150 Yote powered
    Too Hot to Handle, Too Cold to Hold
    Reply With Quote  
     

  3. #103 Re: Watch out for Chris Hinson and Bully Flow Heads!! 
    The Blue One blueguy's Avatar
    Join Date
    Jun 2008
    Location
    Dirtyzville, Missery
    Posts
    31,287
    Thanks (Received)
    1
    Likes (Received)
    2
    Dislikes (Received)
    0
    Chats
    77762
    Quote Originally Posted by Iceman6669 View Post
    If I'm correct this is true, except that I believe Andrew also made other changes like a better turbo.



    I AM THE GEATESTEST...
    200~ WHP.

    Changes everything including the heads.

    Except the rotating assembly.

    All the power is in the heads.

    Makes sense.

    And no, we were comparing Bully Flo to Vendor heads. Who the **** gives two sh1ts about stock heads?
    Sold WBody's: '03 Blue GTP/'98 Green GTP/'98 Silver GT/'05 GXP
    '99 Chevrolet Silverado Classic Z71 4x4 - K&N Intake/Gibson Exhaust #TRUCKTHINGS
    '12 Buick Regal Turbo - ZZP CAI/20% Tint/HID's
    '89 Ford Mustang LX Notchback - LM7 5.3, 4L80, 9", HX40
    '04 Chevrolet Corvette MRM A4/LS1 - TSP LT's, 3"O/R X, AFE S2 CAI
    Reply With Quote  
     

  4. #104 Re: Watch out for Chris Hinson and Bully Flow Heads!! 
    GrandPrix Junkie CrazyGuy03's Avatar
    Join Date
    Jan 2010
    Location
    Buffalo
    Posts
    3,868
    Thanks (Received)
    0
    Likes (Received)
    2
    Dislikes (Received)
    0
    Chats
    7841
    Even better. I have zzp s3 heads on now.... Still wanna make me a set to test ?
    2003 Buick Regal GSX lots of mods - click here to see latest build - http://www.grandprixforums.net/threa...ld-for-the-gsx

    *For Reference - Does not have a Zack Howard Cam - It's an Intense Stage 3 - Thank You*
    Reply With Quote  
     

  5. #105 Re: Watch out for Chris Hinson and Bully Flow Heads!! 
    GXP Level Member GTPpower's Avatar
    Join Date
    May 2008
    Location
    Schuyler, NE
    Posts
    2,971
    Thanks (Received)
    8
    Likes (Received)
    23
    Dislikes (Received)
    0
    Chats
    265
    YES!!!


    2001 GTP Drag Car - XPZ, Tischler heads, Upsidedown M90 IC'd, e85, Gen V, 2.3 w/ 5%OD
    2005 F350 6.0 - studded, deleted, tuned
    2001 GTP - cam, headers, nitrous, stock trans - 11.83 @ 116 <$2k in mods - sold
    Reply With Quote  
     

  6. #106 Re: Watch out for Chris Hinson and Bully Flow Heads!! 
    The Blue One blueguy's Avatar
    Join Date
    Jun 2008
    Location
    Dirtyzville, Missery
    Posts
    31,287
    Thanks (Received)
    1
    Likes (Received)
    2
    Dislikes (Received)
    0
    Chats
    77762
    I'm all for #'s.

    All seems pretty simple to me.

    Especially with the gains to be had...I'd for sure let someone borrow a set to back it all up.

    But it's not my business to run.
    Sold WBody's: '03 Blue GTP/'98 Green GTP/'98 Silver GT/'05 GXP
    '99 Chevrolet Silverado Classic Z71 4x4 - K&N Intake/Gibson Exhaust #TRUCKTHINGS
    '12 Buick Regal Turbo - ZZP CAI/20% Tint/HID's
    '89 Ford Mustang LX Notchback - LM7 5.3, 4L80, 9", HX40
    '04 Chevrolet Corvette MRM A4/LS1 - TSP LT's, 3"O/R X, AFE S2 CAI
    Reply With Quote  
     

  7. #107 Re: Watch out for Chris Hinson and Bully Flow Heads!! 
    GT Level Member 1999black3800's Avatar
    Join Date
    Oct 2012
    Location
    Albany, NY
    Posts
    293
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Chats
    12
    And of course no response lolol
    Reply With Quote  
     

  8. #108 Re: Watch out for Chris Hinson and Bully Flow Heads!! 
    Bastard Reptile's Avatar
    Join Date
    Dec 2007
    Location
    Kansas City, MO
    Posts
    3,459
    Thanks (Received)
    0
    Likes (Received)
    2
    Dislikes (Received)
    0
    Chats
    1492
    Quote Originally Posted by blueguy View Post
    I'm all for #'s.

    All seems pretty simple to me.

    Especially with the gains to be had...I'd for sure let someone borrow a set to back it all up.

    But it's not my business to run.
    I wouldn't. That's a lot of time and money out of my pocket in hopes that I get the heads back.

    And before OP gets his panties in a bunch, I'm not calling him a thief.

    I don't trust anybody.
    Reply With Quote  
     

  9. #109 Re: Watch out for Chris Hinson and Bully Flow Heads!! 
    Donating Users 16MustangVet's Avatar
    Join Date
    May 2009
    Location
    Sh1t hole Afghanistan Currently
    Posts
    5,418
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Chats
    49253
    its pretty damn simple zzp nor intense have ever listed flow numbers for vendor heads now all of a sudden people b1tch chris doesnt? lololol. if you think chris hinson heads are worth it buy a set if you dont dont buy a set. who gives a sh1t.

    imo unless its a max effort sc car or a turbo car thats already gone through every other option to gain hp having heads done is expensive no matter who they are from. just slap a turbo kit on it and worry about transmission parts instead.......

    put the money where its needed doesnt take much from a turbo kit or hell even a sc kit to assploded a trans so why worry about mega buck heads?

    people b1tching about hinson heads price is entirely different from if they work or not. its nearly impossible to put a dollar amount on gains. simply put something work better for the money invested.
    How I treat my car: wreck,fix, repeat.
    Reply With Quote  
     

  10. #110 Re: Watch out for Chris Hinson and Bully Flow Heads!! 
    Bastard Reptile's Avatar
    Join Date
    Dec 2007
    Location
    Kansas City, MO
    Posts
    3,459
    Thanks (Received)
    0
    Likes (Received)
    2
    Dislikes (Received)
    0
    Chats
    1492
    Quote Originally Posted by MyNameBlows View Post
    its pretty damn simple zzp nor intense have ever listed flow numbers for vendor heads now all of a sudden people b1tch chris doesnt? lololol. if you think chris hinson heads are worth it buy a set if you dont dont buy a set. who gives a sh1t.

    imo unless its a max effort sc car or a turbo car thats already gone through every other option to gain hp having heads done is expensive no matter who they are from. just slap a turbo kit on it and worry about transmission parts instead.......

    put the money where its needed doesnt take much from a turbo kit or hell even a sc kit to assploded a trans so why worry about mega buck heads?

    people b1tching about hinson heads price is entirely different from if they work or not. its nearly impossible to put a dollar amount on gains. simply put something work better for the money invested.
    Pretty much sums up what I'm thinking too. Although IMO heads are important in any decent build. In my experience, you can do a budget build if YOU are the one doing the work. Paying someone gets expensive, and you can't bang out heads in a couple of hours. It's not quick work if you're doing it right.
    Reply With Quote  
     

  11. #111  
    GT Level Member 1999black3800's Avatar
    Join Date
    Oct 2012
    Location
    Albany, NY
    Posts
    293
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Chats
    12
    Lol I don't nutt swing over anyone. My bad for pointing out a fraud. We can gladly line our cars up though? Are you just another person who's on this forum and doesn't run there car just there mouth ? I'll just delete this thread sense no one seems to care people are getting ripped off , you all would rather just run your mouth about someone

    So don't go around saying the heads you port are better than vendor heads with nothing to back it up. I'm beginning to believe this site is filled with people who don't run there car or even have a some what fast car but try to put there 2 cents into everything.

    It's either your heads work or they don't. I'm willing to put a set of your heads on my car to prove if there the real deal or not. I don't want them I bought zzp s3 heads already. no reason why I would keep them. Everyone go buy heads from this guy , he can pull on any turbo car on the street.
    Last edited by blueguy; 11-06-2015 at 08:10 PM.
    Reply With Quote  
     

  12. #112 Re: Watch out for Chris Hinson and Bully Flow Heads!! 
    Regal GS Level Member BoostedPontiac's Avatar
    Join Date
    Apr 2014
    Location
    South Haven, MI
    Posts
    1,140
    Thanks (Received)
    0
    Likes (Received)
    2
    Dislikes (Received)
    0
    Chats
    159
    So is it over now?
    98' GP coupe NIC Pacesetters, E85, FSIC, 2.6, heads, blah
    11.82 @ 118.4 with a 1.8 60ft
    Retired: 99' Regal GS Turbo 11.428 @ 122.61 1.7 60ft.
    Retired: 99 GTP top swap nic setup. 13.37@106
    Reply With Quote  
     

  13. #113 Re: Watch out for Chris Hinson and Bully Flow Heads!! 
    The Boss Iceman6669's Avatar
    Join Date
    Jun 2011
    Posts
    7,476
    Thanks (Received)
    8
    Likes (Received)
    38
    Dislikes (Received)
    0
    Chats
    74278
    All the BS is over. If you have anything worth it to add please do. I'm not at all against a discussion.


    I AM THE GEATESTEST...
    97 GTP Sold-prolly rusted away by now
    2011 F-150 Yote powered
    Too Hot to Handle, Too Cold to Hold
    Reply With Quote  
     

  14. #114 Re: Watch out for Chris Hinson and Bully Flow Heads!! 
    The Blue One blueguy's Avatar
    Join Date
    Jun 2008
    Location
    Dirtyzville, Missery
    Posts
    31,287
    Thanks (Received)
    1
    Likes (Received)
    2
    Dislikes (Received)
    0
    Chats
    77762
    Man, now I've got nothing else fun on this site except the compression smarty rich kid.

    Thanks, Iceman66666669.
    Sold WBody's: '03 Blue GTP/'98 Green GTP/'98 Silver GT/'05 GXP
    '99 Chevrolet Silverado Classic Z71 4x4 - K&N Intake/Gibson Exhaust #TRUCKTHINGS
    '12 Buick Regal Turbo - ZZP CAI/20% Tint/HID's
    '89 Ford Mustang LX Notchback - LM7 5.3, 4L80, 9", HX40
    '04 Chevrolet Corvette MRM A4/LS1 - TSP LT's, 3"O/R X, AFE S2 CAI
    Reply With Quote  
     

  15. #115 Re: Watch out for Chris Hinson and Bully Flow Heads!! 
    The Boss Iceman6669's Avatar
    Join Date
    Jun 2011
    Posts
    7,476
    Thanks (Received)
    8
    Likes (Received)
    38
    Dislikes (Received)
    0
    Chats
    74278
    I suggest everyone read all the facts. There are some credible issues in between all of the complete crap


    I AM THE GEATESTEST...
    97 GTP Sold-prolly rusted away by now
    2011 F-150 Yote powered
    Too Hot to Handle, Too Cold to Hold
    Reply With Quote  
     

  16. #116 Re: Watch out for Chris Hinson and Bully Flow Heads!! 
    GXP Level Member GTPpower's Avatar
    Join Date
    May 2008
    Location
    Schuyler, NE
    Posts
    2,971
    Thanks (Received)
    8
    Likes (Received)
    23
    Dislikes (Received)
    0
    Chats
    265
    FYI, intense lists flow numbers for their heads.
    http://intense-racing.com/Merchant2/..._Code=3800_HCV


    2001 GTP Drag Car - XPZ, Tischler heads, Upsidedown M90 IC'd, e85, Gen V, 2.3 w/ 5%OD
    2005 F350 6.0 - studded, deleted, tuned
    2001 GTP - cam, headers, nitrous, stock trans - 11.83 @ 116 <$2k in mods - sold
    Reply With Quote  
     

  17. #117 Re: Watch out for Chris Hinson and Bully Flow Heads!! 
    Donating Users 16MustangVet's Avatar
    Join Date
    May 2009
    Location
    Sh1t hole Afghanistan Currently
    Posts
    5,418
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Chats
    49253
    Quote Originally Posted by GTPpower View Post
    FYI, intense lists flow numbers for their heads.
    http://intense-racing.com/Merchant2/..._Code=3800_HCV
    thats weird i never noticed flow numbers from ANY vendors before cool.
    How I treat my car: wreck,fix, repeat.
    Reply With Quote  
     

  18. #118 Re: Watch out for Chris Hinson and Bully Flow Heads!! 
    GXP Level Member GTPpower's Avatar
    Join Date
    May 2008
    Location
    Schuyler, NE
    Posts
    2,971
    Thanks (Received)
    8
    Likes (Received)
    23
    Dislikes (Received)
    0
    Chats
    265
    Quote Originally Posted by MyNameBlows View Post
    thats weird i never noticed flow numbers from ANY vendors before cool.
    They are numbers from old intense. I don't believe the new intense has the same port work. They may also have been slightly inflated as well.


    2001 GTP Drag Car - XPZ, Tischler heads, Upsidedown M90 IC'd, e85, Gen V, 2.3 w/ 5%OD
    2005 F350 6.0 - studded, deleted, tuned
    2001 GTP - cam, headers, nitrous, stock trans - 11.83 @ 116 <$2k in mods - sold
    Reply With Quote  
     

  19. #119 Re: Watch out for Chris Hinson and Bully Flow Heads!! 
    The Boss Iceman6669's Avatar
    Join Date
    Jun 2011
    Posts
    7,476
    Thanks (Received)
    8
    Likes (Received)
    38
    Dislikes (Received)
    0
    Chats
    74278
    I was told by ZZP that they don't even flow test their heads anymore. Told me that the numbers were so easy to skew depending on how you setup the flow test, that they were basically pointless.


    I AM THE GEATESTEST...
    97 GTP Sold-prolly rusted away by now
    2011 F-150 Yote powered
    Too Hot to Handle, Too Cold to Hold
    Reply With Quote  
     

  20. #120 Re: Watch out for Chris Hinson and Bully Flow Heads!! 
    GXP Level Member GTPpower's Avatar
    Join Date
    May 2008
    Location
    Schuyler, NE
    Posts
    2,971
    Thanks (Received)
    8
    Likes (Received)
    23
    Dislikes (Received)
    0
    Chats
    265
    Haha


    2001 GTP Drag Car - XPZ, Tischler heads, Upsidedown M90 IC'd, e85, Gen V, 2.3 w/ 5%OD
    2005 F350 6.0 - studded, deleted, tuned
    2001 GTP - cam, headers, nitrous, stock trans - 11.83 @ 116 <$2k in mods - sold
    Reply With Quote  
     

Page 6 of 9 FirstFirst ... 45678 ... LastLast

Similar Threads

  1. SALE Gen v, bully flow heads, SD headers etc
    By mpreuss in forum For Sale - Parts
    Replies: 19
    Last Post: 06-23-2016, 12:17 AM
  2. Chris's 00 Regal GS
    By SunocoChris in forum Members Rides
    Replies: 22
    Last Post: 04-16-2016, 01:44 PM
  3. Hinson Heads ___S3x___or S2x? What Timing setup?
    By PWNED in forum 3.8L V6 Supercharged (L67)(L32)
    Replies: 54
    Last Post: 02-21-2015, 08:22 AM
  4. Chris from Pennsylvania
    By chrisatpsu in forum Introductions/Noob Questions
    Replies: 8
    Last Post: 05-19-2012, 07:46 AM
  5. ls1 bully !!!!
    By sal3800 in forum Track Sessions and Kills
    Replies: 10
    Last Post: 05-09-2008, 06:32 PM
Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •