alright, so i had asked this in another post. but what size pulley is good to run for a dd?
Printable View
alright, so i had asked this in another post. but what size pulley is good to run for a dd?
you can DD any pulley you want as long as you keep it tuned right and have all the correct supporting mods.
however, i feel that my car with a my mods below (headers/rockers/throttle body/3.4) its pretty damn fast for the street. i have zero traction in first gear since i have 3.29s in the gt tranny.
nice, we should make sure all you wisconsinites come over to MN for our annual Twin Cities Gathering in June :-)
too far for me. i dont like taking my car any more than an hour out of town. it dont run like it used to, hah.
double post, but..
anyone going to drive the mile? ive gotta send in my paperwork within the next few days.
Madison here.
idk where to post this. but anyone know of a good body shop around the milwaukee area?
Not to highjack - but does anybody know of any good shops or mechanics in general that do honest, good work at a nice price. Located around the Waukesha or Milwaukee County area.
I'm going to install a new front sway bar, and this summer I need to replace my LIM gasket, coolant elbows, injector o rings, supercharger gasket, rear valve cover gasket, and intake o-rings....
Fun stuff - I know. I need to either
A) Find a good shop that I can trust has worked on these cars and knows what they are doing... for the right price.
Or B) Find a member on here that has done this stuff before and could pretty much do it while showing me how for the right price....
hint hint.... I'm looking for option B and will pay $15-20 an hour. lol.
well i not close to waukesha but i do all my own work. and i just got done doing the aluminum intake gaskets on our gtp i would not charge you 15 bucks a hour but we could get it done for you if you were up for a drive.
How much would you charge?Quote:
Originally Posted by bad1999gtp
i would charge you about 10 bucks a hour if not less. just let me know like a week ahead of time so i can plan for that weekend to do nothing.
Yo I'm from the twin cities, but go to school in Eau Claire. I'm wondering what you guys would suggest doing to my GT? I havent done anything to it yet, but heres what Im thinking: cutout valve, take out U bend and res, air intake, tips, High velocity intake insert. Does anyone have any of these things for a good deal??
cutout valve? if youre talking about an exhaust cutout id highly suggest not doing that. it will be nasty loud and sound like crap. you might get .5 hp out of it. id probably leave the resonator on it too, or replace it with a bigger one (i have a glasspack on mine).
otherwise your list looks alright. on top of that id add modded 1.9:1 rockers, powerlog and ported rear manifold, and a 3" downpipe (this will take care of the u-bend too if you want to save money).
Thanks for the reply.
My buddy has a cutout w/o res and w/o u-bend and it sounds BA. I'm mainly looking for sound from those things. Why leave res and what exactly is a 3" downpipe and how would it save me money, I dont really know alot about this stuff yet.
a cutout on a v6 is going to sound ugly at all rpms except idle. so do it if you want, but its going to sound nasty.
leave the resonator because it will be raspy without it. a 3" downpipe is bigger than the stock one (connects the manifolds to the catback) and it would save you money because if you buy a bolt in style then youd take care of your u-bend delete at the same time.
So just a 3" downpipe will be pretty loud? (my stock isnt at all)
^am curious 2 with just a dp!
no, the exhaust will just get a little more throaty. loudness comes from taking out a cat, resonator, mufflers, or changing any of the above to high flow applications.
oh yeah, steer clear of flowmasters unless you like hating your own car.
^is a dp worth the money then on our cars?
yes. that is the most restrictive part of the exhaust outside of the ubend. next is the stock manifolds.