Thread: Turbo build plans!

Hey guys i have a 2002 pontiac grand prix gt coupe. It is bone stock!
I plan on turboing it. here is the list(in order) of everything i plan on doing. Please leave suggestions!

1. Visual mods(tint, bumper inlays, lowering springs, etc)
2. hv3
3. poly bushings
4. zzp 3 inch cat catback
5. Stattama turbo kit T67
6. built f40 or zzp 4t65ehd
7. 18 inch rims w/summer tires
8. s1x cam, 125 springs, retainers
9. e85

stattama turbo kit: http://shop.zzperformance.com/store/...r-L36/L67.aspx
Im hoping by the end i can make about 450-500whp on 10-15lbs of boost. idk just hope
any parts suggestions or places to get the work done would be great! opinions are welcome as well!
anything i should do to the bottom end?

Why put a blower cam in? If you're going to put a cam in during your turbo process, do a turbo cam.
Edit: Also, go with way stiffer valve springs.

Yeah go with an XP or S1x. Both still work well with a turbo, and give bigger lift than the stattama. The XP i believe will bleed off more of the boost. The S1x should help you with more low end torque. But either over the VS.

Originally Posted by wannabegtp

i change the turbo kit to the stattama cause it has all i wanted plus some goodies

just like that? jumped up $1500 like it was nothing. Must be nice...

Originally Posted by 98MailboyVet

3k ill sell a modded cartuning kit with a t70 turbo kit and st5 cam with hv3 prj fuel rails......

also screw the shorter dog bones just makes less room for turbo downpipe and dont need a catback exhaust.

st5 cam is going to require 130# or 150# springs and some head work.

j

Just sitting there forever, doing nothing when they could be in a nice engine bay!!!

: )

didnt your already have a turbo build thread? you sure make alot of threads about modding.
you should make a thread about your car in the member ride thread.