Close enough right?
Sent from BFE
Printable View
Close enough right?
Sent from BFE
http://i991.photobucket.com/albums/a...1D6F217564.jpg
ok finally got her in the shop and started tearing her apart since it was a stupid slow day at work today
http://i991.photobucket.com/albums/a...62DD6E2636.jpg
my little brother working on upper and lower ball joints on an f250 it was a B and i just helped a bit haha
http://i991.photobucket.com/albums/a...BAE9E6DEDE.jpg
not good eally leaky bottom oil n trans pan next with poly lower engine mount is next check
http://i991.photobucket.com/albums/a...CBDCF69A44.jpg
its all naked now w time to put to put new parts on
new parts oh yea hub rotor pads and inner and outer tie rods but i did take out my ledt inner tie rod and a butt load of liquid came out, bad rack n pinion maybe? oh well
http://i991.photobucket.com/albums/a...48DA1CD6DB.jpg
got her on the alignment rack
http://i991.photobucket.com/albums/a...6D80AD17D5.jpg
damn son my **** was way off i wasnth able to adjust right rear toe since the bar wouldnth move what is the name of that bar to adjust toe
http://i991.photobucket.com/albums/a...65EB3CF333.jpg
and i couldnth resist taking a picture of dat A S S Now after worked i went ahead and did a couple runs with a friend of mine who drives a 09 cobalt SS nothing dangerous just 30-60 runs and 0-60 runs dat it and his shet was quick idk could i be a whole lot slower cuz of my engine mounts? and well more to come
oh yea my lower ball joints are riveted in sooooo FACK that imjust return my new lower ball joints and get full lower control arms from rockauto
looks like rims will come later later gotta get my mounts and maybe some other stuff bought my wifes dads civic for 250 bucks running and good and i allready have a buyer this saturday coming up for 1500 so we will see haha
Looking good man. I'm jealous of your exclusive access to a lift haha. I have an inspection pit...
yea its pretty nice to have a loft but i can only work on my stuff when its stupid slow
I'm definitely buying a lift if I get this house I'm looking at. Possibly 2 lifts
f**k it get one for the driveway too haha. and my rear tie rods were seized up too when I did an alignment on my car.
ok n they r just called rear tie rods right?
No. They're called lateral links and some call them track bars
oops my bad. when i bought them from carquest over the phone i said tie rods and the right parts came! haha maybe i just ended up talking to a smart guy.
ok thanks guys couple of questions if yall can answer maybe some tips and trick to replace bottom engine mount and oil pan gasket ??? also i have found aome good wheels 5x4.5 same as 5x114.3 the hub bore is 73.1 will that be a perfect fit or what and will anything from a hub bore from 70-73 fit?
I run a 5x114.3 wheel with a 73.1mm hub bore no issues. But i also use hubcentric rings.
The stock size is 5x115 but 5x114.3 works, i recommend using hubcentric rings to match our hubsize which is 70.3mm. I got mine for 8 bucks on amazon and they were aluminum too.
Sent from BFE
Nice
This video explains how to remove the oil pan. if you do this you should be able to get the motor mount out too.
http://www.youtube.com/watch?v=enb3iR8jzd4