'05 GXP w/ 3.69's - WEEEEEEEEEEEEEEEEE, TEP trans installed with some vids

**MrPoopyButthole** · 01-16-2015

You ain't gonna walk right for a week.

**blueguy** · 01-16-2015

Originally Posted by dRunK13

You ain't gonna walk right for a week.

Says most Saab owners

**MrPoopyButthole** · 01-16-2015

Oh no...that is what I whispered in your ear last night...or do you not remember, maybe the roofie kicked in too soon.

**blueguy** · 01-16-2015

Must have.

**92builtbird** · 01-17-2015

When you do the LS6 IM, can you please do a comprehensive write-up? Maybe it's just me, but Nathan's wasn't that clear to me..

**DirtDog** · 01-18-2015

Originally Posted by 92builtbird

When you do the LS6 IM, can you please do a comprehensive write-up? Maybe it's just me, but Nathan's wasn't that clear to me..

Bro on ls1 tech in the ls4 section there's a perfect IM swap sticky on how to. Tons of pics and all

Sent from my HTC6525LVW using Tapatalk

**92builtbird** · 01-18-2015

I saw the thread that davidgxp did, and it's a nice write up. I'm just pretty unclear when he gets to the VLOM. If you don't want to have DOD functional, you can just pull the connector out... But where is the hole that needs to be welded?

**92builtbird** · 01-18-2015

Basically if you don't want DOD, do you just ditch this whole thing and weld the hole it comes out of, and grind flush?

**DirtDog** · 01-18-2015

No hole needs to be welded. Just the opsu needs to be cut and rewelded at a 30° angle.

Only time a hole needs to be welded is if u go the route I did.

Top is way I did it and 91parkave. Bottom is the stock tray with opsu rewelded at 30°

Sent from my HTC6525LVW using Tapatalk

**DirtDog** · 01-18-2015

For the DoD I just smoothed the stock wires down and used gasket maker lol. And JB weld

Sent from my HTC6525LVW using Tapatalk

**DirtDog** · 01-18-2015

Sent from my HTC6525LVW using Tapatalk

**92builtbird** · 01-18-2015

First picture is a stock VLOM with the opsu re-welded at a 30 degree angle. The second picture is what kind of VLOM, and what exactly did you weld? Did you cut the opsu off and weld the hole?

**DirtDog** · 01-18-2015

Second pic is a g8 GXP DoD tray. Cut the opsu off. Slightly reworked the oil valley. Then tig welded a top on.
Here's how it looked while I was reworking it.

Sent from my HTC6525LVW using Tapatalk

**92builtbird** · 01-18-2015

Here is the stock VLOM. The red circle is the opsu that has been cut off and re-welded at a 30 degree angle. If I do not want to use DOD, can I just throw out the connector and pig tail and all that **** circled in yellow, and weld that hole closed and grind flush???

**DirtDog** · 01-18-2015

Yup if u wanted to.

Sent from my HTC6525LVW using Tapatalk

**DirtDog** · 01-18-2015

Just leave the DoD solenoids intact on bottom of tray

Sent from my HTC6525LVW using Tapatalk

**Oxfire** · 01-19-2015

Sweet car brah.

**92builtbird** · 01-19-2015

Another question: I'm going to use the Dorman ls6 intake, ls2 throttle body, with the ls1 to ls2 throttle body adapter. (Along with the ls2 pigtail.) I have a 07, so do you know off hand if I have the 6-pin connector? Was there a year that they made the switch from 8 pin to 6???