yes!
*fake like button*
Printable View
yes!
*fake like button*
Yay Audi led strip do it!
Or not
no LED strips. those are gawdy.
Agreed!
But will it blend?
Only cars that came with LED strips can have them.
^ speaks the true
But If it's not a Audi get rid of the LEDs.
New Cherokees look retarded with them, Chrysler 300 or maybe it's the Sebring look retarded with them.
They are all doing it now...so it is too late.
Nissan's are the worst because they can't get the color right LOL
I agree with Dave, unless it came from the factory with LEDs it shouldn't have them. I do like them on most cars, some look really out of place tho.
I didn't check the thread Red posted but there's got to be a few options for upgrading the projectors.
And being a V I'm assuming it has HID bulbs already?
yes, it's a stock D1S HID setup, but the projector from pictures i've seen is foggy and just terrible quality. an upgrade on the projector probably would do me good.
theoretically i'd like to stick with something as closely sized to the stock one in order to be able to replace it as easy as possible. i'll admit the stock headlights are pretty good already, but a similar sized, but more clear projector would be a definite upgrade.
first tank of gas is through the car. average 15.3mpg.
hah!
booty, booty, booty
http://i520.photobucket.com/albums/w...psda4f355d.jpg
side note: i need to get off of photobucket and move somewhere that won't demolish the picture quality...i'm done with those shenanigans.
Not sure I belong on this site, as soon as I seen D1, procharger was the first thing in my head. I got excited then I realized it was for a set of headlights.
Quote:
Originally Posted by Bio248
Tails and 3rd brake light need tinted....maybe the reverse lights too, but that might be too much dark on the rear
the GTO procharger kit bolts on with a few modifications. if i went boosted, i think it'd be the way i'd go.Quote:
Originally Posted by siLversLeigh
i was going to have ray tint all of the rear lights real lightly. still very visible through them, but not stock.Quote:
Originally Posted by Below Average Joe
so i decided it's much easier just to replace the lens versus retrofitting a completely new projector. this will undoubtedly clean up the low beams light output and will be the cheapest solution. they range from $40-45 from the retrofit source.
i'm much more comfortable with this option!
MUCH MORE COMFY.
Where are plates?
U GET PLATES?
use imgur.com
per the tracking information, i should have the title when i get home from work. then i will register it tomorrow on lunch.Quote:
Originally Posted by blueguy
Will the plates say "NIPPLE"?