Right..Schramm.
Good deal, I've put 100K on the rears I got out of a yard with supposedly 8K on them. Came with the full knuckles
Printable View
Right..Schramm.
Good deal, I've put 100K on the rears I got out of a yard with supposedly 8K on them. Came with the full knuckles
i'd have paid another $60ish bucks for new rears when the used ones will do just fine.
and since they're an OEM part they're legit brembos, unlike the fronts with are a delco part.
This right here...is what you should do...forget the V.
https://www.youtube.com/watch?v=ooFWD5w6pXA
no.
Psh...
+1 doo eeetttQuote:
Originally Posted by Diddler
Except.
Get the estate wagon or whatever.
With an LS6 in it.
And keep the wooden panels.
http://onlycarspictures.com/uploads/...e-wagon-08.jpg
^^^ That is a badass baby hauler!
you guys are retarded.
Hence Saab and GXP with 3stupid9's
here's the new shifter installed. not much to look at since most of it is under the car or under the boot, so yeah.
shifting is much firmer and i feel more confident changing gears. this unit is much beefier than the hurst i had. it could be that i have the knob height set a little higher for more leverage and that the stainless ball i have on it is super heavy, but i'm digging the final results. when first installed i had the center section threaded down too far and the linkage was hitting the driveshaft so i had to shorten the throw. right now the throw is probably about the same as what the hurst was, but i have the knob height slightly higher.
http://i520.photobucket.com/albums/w...psnmwips7w.jpg
http://i520.photobucket.com/albums/w...ps4hwcwh9d.jpg
http://i520.photobucket.com/albums/w...psyd76rtrp.jpg
Ok.. you just made the GXP look better than a Caddy..
my car is freakin filthy.
Is that why you put one of Dave Diddler's balls on the end of your shift rod?
parking brake parts came in today.
http://i520.photobucket.com/albums/w...pszxi0rcez.jpg
dropping the rotors off tomorrow to get the hub bore machined.
Lots of stuffs and monies
would the hurst shifter fit a tko tranny?
Needs WeatherTech mats
it's made for a 5th gen camaro, but it's got a sleeve pressed on it that adapts it to my car.Quote:
Originally Posted by redlinepontiac
so no.
they don't make a set for my car or i'd have a set already.Quote:
Originally Posted by spazzz
Weather tech floor mats for CTS won't work?
http://www.autoanything.com/floor-mats/64A1462A0A0.aspx