You better hurtz.Quote:
Originally Posted by ITHURTZ
Get off your vajayjay.
:)
Printable View
You better hurtz.Quote:
Originally Posted by ITHURTZ
Get off your vajayjay.
:)
you realize you can slot the bolt holes and move it up at least a little bit anyways.
Eh if it breaks from the constant touching maybe ;)
Its boring putting this thing on alone, the car isnt give me any help either
As far as it reaches
https://farm6.staticflickr.com/5501/...3a4d2e43_c.jpgUntitled by smetters20, on Flickr
https://farm6.staticflickr.com/5561/...9c027bf1_c.jpgUntitled by smetters20, on Flickr
I have some 2.5" exhaust pipe so I guess Ill just use that as a ****ing filler, need another coupling though.
On a positive note, ac compressor removed and pulley installed in its place, took 10min for the entire project.
Im getting really tired of going to the dam store, still have to go anyway, coupling and because I lost a nut for the fuel rail hahah.
Next. Can I hook up the BOV to the line going to the bbv solenoid or w/e it is? Id rather use the port on the s/c for the wg.
Finished the battery harness, love easy things
The big fat harness under your radiator, that carries the power and ground from the battery
https://farm6.staticflickr.com/5532/...2ac0de93_c.jpgUntitled by smetters20, on Flickr
Power and negative inside
https://farm3.staticflickr.com/2920/...b7895721_c.jpgUntitled by smetters20, on Flickr
The ground leads to the transmission, which is also connected to 2 tiny wires comming from another harness
https://farm6.staticflickr.com/5552/...b60874eb_c.jpgUntitled by smetters20, on Flickr
So I cut the big wire off
https://farm3.staticflickr.com/2897/...0548caed_c.jpgUntitled by smetters20, on Flickr
There you go folks, the entire harness that goes from the battery to the starter and then grounds out....simple
https://farm4.staticflickr.com/3914/...4049d288_c.jpgUntitled by smetters20, on Flickr
Bigger wire is always better
https://farm3.staticflickr.com/2926/...0af524e9_c.jpgUntitled by smetters20, on Flickr
Supplies
https://farm4.staticflickr.com/3903/...4def644e_c.jpgUntitled by smetters20, on Flickr
https://farm6.staticflickr.com/5581/...b94974fc_c.jpgUntitled by smetters20, on Flickr
With same color wire replacements dont be stupid, mark both ends of the negative cable incase you mix something up
https://farm3.staticflickr.com/2898/...3f4ef99d_c.jpgUntitled by smetters20, on Flickr
Red is for positive
https://farm4.staticflickr.com/3850/...97db92c7_c.jpgUntitled by smetters20, on Flickr
One wire done, easy ****
https://farm4.staticflickr.com/3899/...f9670650_c.jpgUntitled by smetters20, on Flickr
New harness done
https://farm3.staticflickr.com/2923/...8de84553_c.jpgUntitled by smetters20, on Flickr
New battery hooker uppers
https://farm4.staticflickr.com/3879/...d29527df_c.jpgUntitled by smetters20, on Flickr
New harness wrapped in loom
https://farm4.staticflickr.com/3844/...96557dd0_c.jpgUntitled by smetters20, on Flickr
Remember those tiny wires? yup I combined them and gave them their own ring terminal
https://farm3.staticflickr.com/2934/...985c59f3_c.jpgUntitled by smetters20, on Flickr
Finished product trans ground
https://farm6.staticflickr.com/5481/...d620de18_c.jpgUntitled by smetters20, on Flickr
starter
https://farm3.staticflickr.com/2897/...0cfaa201_c.jpgUntitled by smetters20, on Flickr
Alternator, ignore the oem line I havent cut it yet
https://farm4.staticflickr.com/3858/...c1796a28_c.jpgUntitled by smetters20, on Flickr
Fuse box
https://farm4.staticflickr.com/3880/...a1d3d04a_c.jpgUntitled by smetters20, on Flickr
It seems someone took my battery out.....
https://farm4.staticflickr.com/3882/...eb8b7794_c.jpgUntitled by smetters20, on Flickr
Go figure 2 1/0ga lines with a 1" loom still fit in the factory location (barley)
https://farm3.staticflickr.com/2930/...0a72cc90_c.jpgUntitled by smetters20, on Flickr
I started out doing the caspers re wire, but after I put the harness under the car I decided to do this instead, still fun. Hope I didnt cross the wires!
those cable ends came out better then expected. was happy to see you bolted the eye loops the new terminals, i was cringing a bit as i scrolled down past the parts pics. lol
haha, I do the best I can!
well done sir. you faked out my bare wire hating sense's.
Air is bad for wire you should know this ;):p
i do, i preach it weekly here. dry wire is a killer. your old ground was full of it. :th_laugh-lol3:
Ya that was horrible, hopefully my car will thank me for this upgrade, maybe my starter will spin a rod out the oil pan now.
casper rewire gives me 2 square plugs at the end of the harness, my fuel pump lines are not even close to a square.... now wtf?
Am I missing something here?
https://farm6.staticflickr.com/5471/...023974fa_c.jpgUntitled by smetters20, on Flickr
https://farm3.staticflickr.com/2940/...fbd58976_c.jpgUntitled by smetters20, on Flickr
https://farm4.staticflickr.com/3874/...a7a2575d_c.jpgUntitled by smetters20, on Flickr
:th_laugh-pointup:Quote:
Originally Posted by ITHURTZ
Yeah, those aren't the stock connectors on your fuel pump.Quote:
Originally Posted by ITHURTZ
That's an aftermarket fuel pump, an Airtex E3973M.
Looks like the prior owner cut the connectors off, and put those ones on there.
ya, fourfinger helped me figure that out. Good news if the fuel pump goes out, the rewire will already be there and I dont need to cut any wires! Bad news few pump is only 3 years old, it is a airtex though..... ;)
Finished my plastic mesh attached with automotive goop.
https://farm3.staticflickr.com/2897/...18c78534_z.jpgUntitled by smetters20, on Flickr
Bout sums it up
https://farm3.staticflickr.com/2911/...a992419c_c.jpgUntitled by smetters20, on Flickr
Yes I put a sticker on, its good for 200hp
https://farm4.staticflickr.com/3849/...ca92a6dd_c.jpgUntitled by smetters20, on Flickr
https://farm4.staticflickr.com/3925/...cec70baf_c.jpgUntitled by smetters20, on Flickr
GTP replaced
https://farm3.staticflickr.com/2916/...09c833f1_c.jpgUntitled by smetters20, on Flickr
https://farm4.staticflickr.com/3923/...6dc4ba45_c.jpgUntitled by smetters20, on Flickr
Still waiting on my dam pcm, other than that its turn the key and go
does it run yet?
No pcm, Im hoping monday because I am about to go nuts.
Is it gonna be a fastkar
Sent from the Milky Way
I am predicting a 14.1 in the 1/4