Thread: My Baby - 2000 Silver Mist GTP :) lots of pics!

Page 5 of 9 FirstFirst ... 34567 ... LastLast
Results 81 to 100 of 176
  1. #81 Re: My Baby - 2000 Silver Mist GTP :) lots of pics! 
    GXP Level Member coolone's Avatar
    Join Date
    Nov 2011
    Location
    NY
    Posts
    2,374
    Thanks (Received)
    0
    Likes (Received)
    3
    Dislikes (Received)
    0
    Quote Originally Posted by xxpappas13xx View Post
    On the blower, did you just use silver spray paint, or did you get high temp paint? Also any clear or prep for it?
    Prep is key... Lots of brake cleaner at first to get everything and anything off, lim too... Dig in there, get all the crap out of the little crevices and such. used some micro fibers soaked in brake cleaner n tought spots. Then used one of those silicone bristle disks to "lightly" take off any remaining crap. Don't want to etch anything though, so don't press, I used it in a drill for this even though I have air/die grinders. Especially the top of the SC, like to take all the loose stuff off, you'll see when you go at it.







    Final wipe down with brake cleaner then again with acetone. No primer or base, have had great success with Dulicolor High Heat Engine Paint (Ceramic). No clear coat... I can take a pic of my other GTP SC and you'd see the color is still rock solid, no discoloring... I believe clear coat may do that, and I don't want to find out. Prep is really everything. Make sure it is good and clean and paint will stick. The Duplicolor goes on watery, so use very thin coats, no kore than one/two quick light passes over a spot... You'll want to go heavy as it covers nice, but resist the temptation. Light coat will dry to the touch within a few minutes, so its easy to give it a few quick light coats, then medium coat once or twice to finish it off. I think I put 6 good coats on what you see (2/3 light, 2/3 medium) with a minor touch up spray (spot) here and there : )
    Last edited by coolone; 02-18-2015 at 07:37 PM.
    Overkill BBC Cam, YT 1.8 RR's, Rhodes Lifters, STGII Heads, GenV, Pacesetters, 3" Exh to Tips, TEP Trans. N*, ID 75# injectors/E85 coming soon
    Reply With Quote  
     

  2. #82 Re: My Baby - 2000 Silver Mist GTP :) lots of pics! 
    GXP Level Member coolone's Avatar
    Join Date
    Nov 2011
    Location
    NY
    Posts
    2,374
    Thanks (Received)
    0
    Likes (Received)
    3
    Dislikes (Received)
    0
    Ok, so I think I'm finally going to have a week off... Yippee!!! After months of 6-7 day weeks...


    lol...

    anyways, I have a question on timeline. I need to do a few things now to swap everything and make build complete.

    1. Remove engine/tranny from parts car.
    2. Remove engine/tranny from good car.
    3. Install parts car tranny(built), with engine(built) into good car.

    ok, let me know how much time it'll take, garage has no lift and parts car is not at garage, but not far away (5 mins).
    Let me know separately (1,2 &3) and collectively.

    just trying to guage the time needed.
    Overkill BBC Cam, YT 1.8 RR's, Rhodes Lifters, STGII Heads, GenV, Pacesetters, 3" Exh to Tips, TEP Trans. N*, ID 75# injectors/E85 coming soon
    Reply With Quote  
     

  3. #83 My Baby - 2000 Silver Mist GTP :) lots of pics! 
    Turbo is the way to go. REDCRAPGP's Avatar
    Join Date
    Aug 2009
    Location
    Behind you...sike made you look Bish
    Posts
    16,085
    Thanks (Received)
    0
    Likes (Received)
    1
    Dislikes (Received)
    0
    7 years

    But if your Bill probably a hr

    But your not Bill so 7 days or 168 hrs


    Sent from my iPhone using Tapatalk
    Last edited by REDCRAPGP; 07-06-2015 at 09:02 PM.
    Squirrels are my engine. I need a Ford Regal
    04 Comp G.
    Reply With Quote  
     

  4. #84 Re: My Baby - 2000 Silver Mist GTP :) lots of pics! 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    i'd give yourself 3 days easy. unless you got help. it took me 2 days to r and r a engine, 100% by myself. no help.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  5. #85 Re: My Baby - 2000 Silver Mist GTP :) lots of pics! 
    Turbo is the way to go. REDCRAPGP's Avatar
    Join Date
    Aug 2009
    Location
    Behind you...sike made you look Bish
    Posts
    16,085
    Thanks (Received)
    0
    Likes (Received)
    1
    Dislikes (Received)
    0
    The built engine is already together right?


    Sent from my iPhone using Tapatalk
    Squirrels are my engine. I need a Ford Regal
    04 Comp G.
    Reply With Quote  
     

  6. #86 Re: My Baby - 2000 Silver Mist GTP :) lots of pics! 
    GXP Level Member coolone's Avatar
    Join Date
    Nov 2011
    Location
    NY
    Posts
    2,374
    Thanks (Received)
    0
    Likes (Received)
    3
    Dislikes (Received)
    0
    Thanks for the info. Guys...

    Lol'd Bill... It would be worth it then to bring a few cases of beer and stop by Bill, take less time then ; ) hahaha

    Yes, Red, sorry I didn't say that. Engine is all together waiting install (previous posts this thread). Just a few bolts missing that I'll take from the parts engine while making the transfer. Keeping everything functional too, evap, AC, no EGR though. For the most part, I figured 3 days solid, or 5 with beers included, lol. So I'm not far off then on my guess. For the record, it seems like 7 years... Wanted this together before spring, but ehhh!

    I appreciate the info.!
    Overkill BBC Cam, YT 1.8 RR's, Rhodes Lifters, STGII Heads, GenV, Pacesetters, 3" Exh to Tips, TEP Trans. N*, ID 75# injectors/E85 coming soon
    Reply With Quote  
     

  7. #87 Re: My Baby - 2000 Silver Mist GTP :) lots of pics! 
    Turbo is the way to go. REDCRAPGP's Avatar
    Join Date
    Aug 2009
    Location
    Behind you...sike made you look Bish
    Posts
    16,085
    Thanks (Received)
    0
    Likes (Received)
    1
    Dislikes (Received)
    0
    Yea I seriously would give it 3-5 days.. Depend on how in the zone you are and no sense in overworking yourself.. Plus I'm sure you'll want to tidy and clean sh*t as you go along.


    Sent from my iPhone using Tapatalk
    Squirrels are my engine. I need a Ford Regal
    04 Comp G.
    Reply With Quote  
     

  8. #88 Re: My Baby - 2000 Silver Mist GTP :) lots of pics! 
    GXP Level Member coolone's Avatar
    Join Date
    Nov 2011
    Location
    NY
    Posts
    2,374
    Thanks (Received)
    0
    Likes (Received)
    3
    Dislikes (Received)
    0
    Quote Originally Posted by REDCOMPG View Post
    Yea I seriously would give it 3-5 days.. Depend on how in the zone you are and no sense in overworking yourself..

    Plus I'm sure you'll want to tidy and clean sh*t as you go along.


    Sent from my iPhone using Tapatalk
    shipwrights disease... Yep! Can't go in there without doing this, doing that... Lol

    in addition to the engine/tranny swap, I have new powder coated Fbody calipers, stainless brake lines, some exhaust stuff to do, lolz...
    : ) want to maybe relocate the icm and coil packs too... Hahaha

    but out all im really worried about is the power & drive train for now.
    Overkill BBC Cam, YT 1.8 RR's, Rhodes Lifters, STGII Heads, GenV, Pacesetters, 3" Exh to Tips, TEP Trans. N*, ID 75# injectors/E85 coming soon
    Reply With Quote  
     

  9. #89 Re: My Baby - 2000 Silver Mist GTP :) lots of pics! 
    Turbo is the way to go. REDCRAPGP's Avatar
    Join Date
    Aug 2009
    Location
    Behind you...sike made you look Bish
    Posts
    16,085
    Thanks (Received)
    0
    Likes (Received)
    1
    Dislikes (Received)
    0
    Yup powertrain for now all that other crap can be done another day..


    Sent from my iPhone using Tapatalk
    Squirrels are my engine. I need a Ford Regal
    04 Comp G.
    Reply With Quote  
     

  10. #90 Re: My Baby - 2000 Silver Mist GTP :) lots of pics! 
    Push to Open GTPkirmet's Avatar
    Join Date
    Sep 2015
    Location
    Spokane
    Posts
    197
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Where did you get the red wires? I like them oddly enough.....
    98 GP Build?: http://www.grandprixforums.net/threa...-in-particular
    Power :Gen V, 3.6, 10.5mm, HS 1.9s, 105#, SDs, FWI, DHP Tuned, CS144
    Stuff :Gauges, 04 Leather seats, Cool stereo, Pregens, LEDs, Retros

    Reply With Quote  
     

  11. #91 Re: My Baby - 2000 Silver Mist GTP :) lots of pics! 
    GXP Level Member coolone's Avatar
    Join Date
    Nov 2011
    Location
    NY
    Posts
    2,374
    Thanks (Received)
    0
    Likes (Received)
    3
    Dislikes (Received)
    0
    So, after getting sidetracked for a year, yes... I know, but a year... I'm back in track to get this done. Have taken the engine/transmission from the parts car and will begin to assemble things I need. I'm sure I've forgotten a few things as I've not given this the attention it needs... But for now, parts car (take what I need), then clean things up, transmission, etc., then assemble transmission with built engine.

    Engine has been sitting a while so I'm thinking I want to get some oil in it, spin it a bit to lubricate everything prior to mating with transmission and installing it? Thoughts are welcome on that...

    and hopefully next week, engine/transmission out of my car, it started leaking and I think it's a good time then ; ) anyways, lol...

    once engine bay bay is empty I'll clean it up a bit, there's still some axle grease and road grime for sure in there.



    [/URL]

    [/URL]

    : )
    Last edited by coolone; 09-03-2016 at 07:22 AM.
    Overkill BBC Cam, YT 1.8 RR's, Rhodes Lifters, STGII Heads, GenV, Pacesetters, 3" Exh to Tips, TEP Trans. N*, ID 75# injectors/E85 coming soon
    Reply With Quote  
     

  12. #92 Re: My Baby - 2000 Silver Mist GTP :) lots of pics! 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    you forgot to unbolt the tc. i hope your not reusing it. it could be all jack up from being taken apart like that.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  13. #93 Re: My Baby - 2000 Silver Mist GTP :) lots of pics! 
    GXP Level Member coolone's Avatar
    Join Date
    Nov 2011
    Location
    NY
    Posts
    2,374
    Thanks (Received)
    0
    Likes (Received)
    3
    Dislikes (Received)
    0
    Ok have to edit this a little bit at a time because Photbucket is torturing me...



    it starts with proper supplies... But not until some work got done (Scotty), lol...



    Engine/Trans on the way out, only 115k, so like new ; ). Will shrink wrap it and hold onto them for a rainy day.



    On their way...



    Which one do you think is going back in ; )



    Long long story short, it's ready to go back... I'll add some details later, lol.







    Anyone got a little grease... So damn tight...



    And and its in...



    ...
    Last edited by coolone; 10-13-2016 at 08:05 PM.
    Overkill BBC Cam, YT 1.8 RR's, Rhodes Lifters, STGII Heads, GenV, Pacesetters, 3" Exh to Tips, TEP Trans. N*, ID 75# injectors/E85 coming soon
    Reply With Quote  
     

  14. #94 Re: My Baby - 2000 Silver Mist GTP :) lots of pics! 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    flat tire and land shark, sounds like a hang over lol the 3 rd one over looks like a Lowenbrau knock off label lol

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  15. #95 Re: My Baby - 2000 Silver Mist GTP :) lots of pics! 
    club of used to own a gp 99prixgt's Avatar
    Join Date
    Jun 2008
    Location
    Jersey
    Posts
    4,643
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Hey man, not sure if you got my last message, i sent you a pm inquiring about my old car you got there on jack stands lol
    16' wrx sti- stock
    06 Spice Red GTO- m6/exhaust/tune/suspension/377whp-383tq-sold
    99 silvermist gp gt-g5/xp/IC/3.0mps-parted&sold
    Reply With Quote  
     

  16. #96 Re: My Baby - 2000 Silver Mist GTP :) lots of pics! 
    GXP Level Member coolone's Avatar
    Join Date
    Nov 2011
    Location
    NY
    Posts
    2,374
    Thanks (Received)
    0
    Likes (Received)
    3
    Dislikes (Received)
    0
    Quote Originally Posted by 99prixgt View Post
    Hey man, not sure if you got my last message, i sent you a pm inquiring about my old car you got there on jack stands lol
    I replied... ? Maybe it didn't go through? Have to wait to update this as my iPad suffered a sudden broken screen due to not working fast enough! Lmao.

    I will send you a new reply about the car... Sorry the message didn't go through, just another reason tat iPad is now requiring some fixing.
    Overkill BBC Cam, YT 1.8 RR's, Rhodes Lifters, STGII Heads, GenV, Pacesetters, 3" Exh to Tips, TEP Trans. N*, ID 75# injectors/E85 coming soon
    Reply With Quote  
     

  17. #97 Re: My Baby - 2000 Silver Mist GTP :) lots of pics! 
    GXP Level Member coolone's Avatar
    Join Date
    Nov 2011
    Location
    NY
    Posts
    2,374
    Thanks (Received)
    0
    Likes (Received)
    3
    Dislikes (Received)
    0
    Well I busted the iPad, so it took a few days to get back to updating the thread. Some pics were added in above and I'll post some more as I can. There were lots of bumps along the way, little things, like busting the knock sensor and water temp sensor. Swapping the trans fluid line connectors so I could use the stock lines on the car, one trans had the taper tube connector and the car had the clip in, so swapped them. I Busted the trans selector switch squeezing the engine/trans back in, lucky I had a spare. Other little things like figuring out that a normal pulley puller don't work on the balancer pulley, making a trip to hardware store and getting the rights bolts. In addition, didn't use the stock center bolt as the taper would ruin the first few threads on the crank, so I cut the old crank/pulley bolt down to use as a stud.





    Also, had to fashion a wrench to get the extra knock sensor off the other engine without disassembling the the engine/trans. Lol...



    Then I realized I didn't have a GenV to stock TB adapter, so just put the N* on. Spectre filter is beat up, so new one is on order. Some of the brake lines were a bit rusted, but I opted to just leave them, will replace them if and when they go... Silly I know but wanted the engine back in. There's a bunch of other little things too, like the Trans Diff speed sensor being different and not noticing until the thing was in, so had to swap that. And the headers, well, I elected to use ARP studs for the heads and the nut/stud combo sit higher, thereby requiring me to notch the headers so they could bolt in. Would've been good to dry fit them prior to install. All in all, the problems were that I had such a time gap from when I started this, to now doing it. Anyways...


    Last edited by coolone; 10-13-2016 at 08:31 PM.
    Overkill BBC Cam, YT 1.8 RR's, Rhodes Lifters, STGII Heads, GenV, Pacesetters, 3" Exh to Tips, TEP Trans. N*, ID 75# injectors/E85 coming soon
    Reply With Quote  
     

  18. #98 Re: My Baby - 2000 Silver Mist GTP :) lots of pics! 
    GXP Level Member coolone's Avatar
    Join Date
    Nov 2011
    Location
    NY
    Posts
    2,374
    Thanks (Received)
    0
    Likes (Received)
    3
    Dislikes (Received)
    0
    Got to get my exhaust flex welded up, bung added for WB and we will be set to start er up! Hopefully today : )
    Overkill BBC Cam, YT 1.8 RR's, Rhodes Lifters, STGII Heads, GenV, Pacesetters, 3" Exh to Tips, TEP Trans. N*, ID 75# injectors/E85 coming soon
    Reply With Quote  
     

  19. #99 Re: My Baby - 2000 Silver Mist GTP :) lots of pics! 
    GXP Level Member coolone's Avatar
    Join Date
    Nov 2011
    Location
    NY
    Posts
    2,374
    Thanks (Received)
    0
    Likes (Received)
    3
    Dislikes (Received)
    0
    And here is a short vid of first start up... Sounds beastly ; )
    Last edited by coolone; 10-17-2016 at 02:02 PM.
    Overkill BBC Cam, YT 1.8 RR's, Rhodes Lifters, STGII Heads, GenV, Pacesetters, 3" Exh to Tips, TEP Trans. N*, ID 75# injectors/E85 coming soon
    Reply With Quote  
     

  20. #100 Re: My Baby - 2000 Silver Mist GTP :) lots of pics! 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    Quote Originally Posted by coolone View Post
    And here is a short vid of first start up... Sounds beastly ; )
    you forgot to post the vid.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

Page 5 of 9 FirstFirst ... 34567 ... LastLast

Similar Threads

  1. my 99 gt dark bronze mist met.
    By HART in forum Visual/Body Modifications
    Replies: 3
    Last Post: 08-25-2009, 09:05 PM
  2. 2000 Silver Grand Prix!!!!
    By Gmohre in forum Introductions/Noob Questions
    Replies: 8
    Last Post: 08-16-2009, 04:43 PM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •