just posting some pics of what I have been tinkering with over the past few months. As most of you know I don't drive the car so I finally decided that I needed a cool show setup for my Audio gear
The parts list is as follows
OEM GM Nav Radio
Type RF X162s comps
Type RF X152s comps
Type RF T168s comps
Type RF X2 Amps
Type RF X4 amps
Type RF X7 amps
Power HX2 Subs
Some of this gear is over 10 years old....circa 2003, and is actually better than the new gear out there.
Anyway
the Crossovers are huge and I was able to hide them in the doors. OF course I had to make brackets and such to do this
I also wanted the install to appear stock (now I know the OEM locations are not for a SQ but for a convenience of the automaker) so you have to make some sacrifices
Here is the tweeter install
Stock
What I chose to do
For the rear doors I did some additions.
Right here is the point of no return, there is now a hole in the door panel
I used a OEM speaker grill from the front tweeter
and it matches the OEM rear speaker Grill
Bracket for the Tweeter
I Chose a pretty good location for the rear crossovers
Brackets
Mounting
Installed pic