Thread: My 98 GP SE and what ive done to it

Baby blue and fuzzy?

Ok More Blue

And my new small tool box

Paint your upper intake blue with white lettering

Originally Posted by dsmuts

Paint your upper intake blue with white lettering

I was just going to do blue lettering.

OK the rims showing damage

Ok found these - waiting to here back to OD

Just a thought, in case you haven't done it already. Before you go thru all the prep work and painting the wheels... PUT THEM ON!

Test fit and make sure they will fit flush and clear the calipers. 15s are tiny and the crosslace 16s come close to rubbing on stock brakes, I can only imagine 15s.

Just don't want you to waste time an have custom painted wheels that might not sell well.

Originally Posted by TLSheff

Just a thought, in case you haven't done it already. Before you go thru all the prep work and painting the wheels... PUT THEM ON!

Test fit and make sure they will fit flush and clear the calipers. 15s are tiny and the crosslace 16s come close to rubbing on stock brakes, I can only imagine 15s.

Just don't want you to waste time an have custom painted wheels that might not sell well.

I had one on without nuts(narrow ones needed) but didnt rotate, but had no noise(scraping or other) when i put on.
I put one on before i bought to confirm bolt pattern.
Ill try again after i have the rubber dismounted.

Those are 15" wheels?

Originally Posted by crazyguy03

Those are 15" wheels?

Ya 15"

Any idea's what to do with the centre caps since they cant be powder coated.
Dont know if they should be blue or white or ??
They are Aluminum with plastic bottom that snaps into the rims.

paint the silver white, and get vinyl overlays for the centre centre, that is a GP logo or something

Originally Posted by Mad Monkey

paint the silver white, and get vinyl overlays for the centre centre, that is a GP logo or something

Never thought about logos - good idea.
Any idea where i can find?
Ill look on www.pfyc.com first

don't look at pfyc.. waste of money even if they had them.

check out http://houseofgrafx.com

OK, if im doing custom, how about one of these???

either the GP checkerboard or the flame skull avatar.. leaning more towards the GP checkerboard

Go with your flaming skull. It's already on your hood.

Contact Ray on rgs.org. He will make you any custom badge or center cap you can think of.

Still think you should try the glow in the dark wheels
http://www.youtube.com/watch?v=JrL19...e_gdata_player