the oil feed and return lines for the turbo...zzp charges 129$ for nylon hose and brass fittings, i have all nice AN lines for way less. as well as a sweet IAT setup. if you go turbo ill be happy to share
Printable View
the oil feed and return lines for the turbo...zzp charges 129$ for nylon hose and brass fittings, i have all nice AN lines for way less. as well as a sweet IAT setup. if you go turbo ill be happy to share
Hmm....
Borg Warner*56mm*turbo (optional extended tip turbo available)
TiAL 38mm wastegate kit (external dump only)
TIG*welded 304 stainless steel*crossover
TIG welded 304 stainless steel 2.5" downpipe
Powder coated intake pipes*
Oil feed and return system
High temp silicone connectors
K&N air filter
Custom PCM programming*for your modifications
Crankcase breather
Autolite 103 plugs gapped for your setup
All required hoses and gaskets
LT1 MAF with wire adapter (04+ GP only)
Coupler and T bolt clamps for MAF (04+ GP only)
Modified charge tube (04+ GP only)
Vacuum hose adapter (04+ GP only)
Fuel rail spacers (04+ GP only)
All installations accessories
Fully detailed instructions
That's the content of the z3 kit, with injectors it's gonna run about $3k
3k????!?!?!!
damn i want a turbo, but i dont want 3k outta my pocket
And then I have to get an overkill PCM cause I have an 08'
forgot to share pics of my projector stuff.... i had a case of the couches lol
here ya go
box o' sh!t
http://i81.photobucket.com/albums/j2...i/DSC00536.jpg
morimoto mini h1's
http://i81.photobucket.com/albums/j2...i/DSC00537.jpg
going to 5000k instead of the 6000k i have now.. i want brighter!
http://i81.photobucket.com/albums/j2...i/DSC00539.jpg
yep thats right, going black on the shrouds, these are graphite's btw
http://i81.photobucket.com/albums/j2...i/DSC00541.jpg
http://i81.photobucket.com/albums/j2...i/DSC00542.jpg
should be able to order my aftermarket headlights tomorrow so i can finish this project :th_nanana:
Nice. I wanna see how you do it. I might retro one day
Aftermarket lights ordered, retrofit is goin down
here's some preview pics, i took enough pics to make a write up, but im lazy so ill do it some other time lol
and im tired so i dont have them sealed back up yet, but they are aimed, and glue and whatnot is drying overnight
http://i81.photobucket.com/albums/j2...n/9d5f23a5.jpg
http://i81.photobucket.com/albums/j2...n/beb3e908.jpg
http://i81.photobucket.com/albums/j2...n/24b5eb6c.jpg
http://i81.photobucket.com/albums/j2...n/5c583fc9.jpg
:D
Looks good boss, keep it up.
Looking good. How big of a hole did you cut in the reflector and our you mounting them w/ the washer method?
you have to open it up clear to the second ring in to get the housing to close, it was a B!TCH
Yea I sold my original retrofit and now i'm figuring out a different way of mounting them to get the cutoff perfectly straight. If you don't mind can you send me pics of the assembly.
I'm glad you went with a matte black shroud.
Yep lol, they are on the car. Ill probably havee to get another set of headlights the passenger side doesnt fit right. Ill post pics soon
snapped a couple pics, sorry i havent been on much lately guys, my computer took a sh!t on me and im only able to get on from my phone, came over to my moms to upload a couple pics for ya
my camera doesnt do the cut off line justice in this pic, ill have to retake soon
http://i81.photobucket.com/albums/j2...i/DSC00543.jpg
and heres some more
http://i81.photobucket.com/albums/j2...i/DSC00548.jpg
http://i81.photobucket.com/albums/j2...i/DSC00547.jpg
http://i81.photobucket.com/albums/j2...i/DSC00546.jpg
http://i81.photobucket.com/albums/j2...i/DSC00545.jpg
http://i81.photobucket.com/albums/j2...i/DSC00549.jpg
:D
Looks great. You should have done clear sidemarkers though...
that^^^or yellow to match the fogs,
good job on the retro btw
I think im gonna take the yellow off the fogs