I got front and rear stb's and gmpp front sway bar, but the rest of my suspension is stock and at 270 000km it still feels floaty lol
Printable View
I got front and rear stb's and gmpp front sway bar, but the rest of my suspension is stock and at 270 000km it still feels floaty lol
Mine's pretty floaty at 93k miles...lol
I finally got the third brake light out of the spoiler...
It was a bish.
I'm stuck at the dentist waiting on the wife, and all I can think about is where to get some 3/16th sheet...
Lol I have a problem.
Took a scan just now, fuel trims haven't learned yet so it was just wasting time... Lol
[Just ordered new LCA's, the Dorman police ones. :D
$85.99 shipped from Amazon, should be here in about a week. then I can put the solid front sway on, that with the STBs... mmmmmm. much better feels. lol]
this statement is now null and void. see below.
Plus, the wife thinks I need new rims. ;) lol about time.
FVCK THIRD PARTY SELLERS ON AMAZON!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!
that is all.
new air filter
https://farm5.staticflickr.com/4228/...c9d5aa0e_o.jpgsuch a turd. by Ben Stryker, on Flickr
wut wut, tiny air filter for tiny amount of horsepower. lol
What did you do with the PCV nipple (giggity)?
Stuck a paper towel into it and drilled a small hole in the oil cap... I need to properly fix it, but time and money. Lol
In that rubber coupling you used for your intake, drill a small hole in it and stick in the pvc pipe fitting that went in the original elbow and get that sealed up with any kind of silicone.
For reference, the intake I had made before I switched to 4".
http://i.imgur.com/OiToBk5.jpg?1
Like I said, I've still got to fix it.... that's a good idea though, if I haven't lost that piece yet. lol
Otherwise, just get a hose that fits on the intake nipple and a pex fitting that fits in said hose, then drill the rubber coupling to squeeze in tight said pex fitting !
This, would cost you maybe, 2$?
yeah... I also need to flush what's left of the dex-cool out, drill, tap and plug the coolant ports on the LIM, hog out the lower coolant passage, and finish putting together this top-swap I've had sitting in my house for about 6 months... lol
I never said I work fast.
speaking of slow work, I got the spoiler scuffed and primed...
Second coat of black, and the damn thing falls off it's hook.
http://i61.photobucket.com/albums/h6...pswi3hekrq.jpg
I fixed it, but it's gonna need more sanding. lol
Always something lol. At least the spoiler itself was okay
Yes, and after reading the can, it says to allow 7 days for the paint to cure....
I don't think so.
Electric blanket FTMFW!
got a coat of clear on it
http://i61.photobucket.com/albums/h6...psetvxdjz9.jpg
once it dries, I'll sand it smooth with some 1200 grit, get rid of the texture that seems to have popped up, then hit it with another coat and go to 2000 grit.
EDIT: you can see the haze of fresh spray in the background. lol
Got it with the last coat of clear, but now I need a buffer... Lol