Cause it's an Fbody and you can't "just" topswap it. Requires reworking the blower and firewall. Which is why 98% of the 3800 Fbody guys go turbo.
Printable View
Cause it's an Fbody and you can't "just" topswap it. Requires reworking the blower and firewall. Which is why 98% of the 3800 Fbody guys go turbo.
Ah. That's right. I wasn't paying attention to what car he had. My friend actually has a V6 Firebird. There is SO MUCH ROOM in his engine bay lol.Quote:
Originally Posted by 4THGENCAMAROFAN
In front sure. Tons of room for a turbo. No room on the top or behind for a blower though. Tight fit
I could see how the connecting rod bearings might become egg shaped, don't know about the rods changing shape though. Actually, the rod bearings could probably be changed quite easily, by just getting the oil pan off. The mains are a different story, though.Quote:
Originally Posted by keonmakesbeatz
Can I get my pistons off like that without taking out the engine ?Quote:
Originally Posted by kmohr3
A top swapped GT with some headers and a stock pulley will get you close to 220. Throw some 1.9 rockers on there to make sure you get there. Or intercool, drop 3-4 pulley sizes, and get more like 260.Quote:
Originally Posted by keonmakesbeatz
It's probably cheaper to just do an L67 swap than a top swap once you factor in the head gaskets, bolts, etc. I've got the heads, fuel rails, blower, ignition bracket, and throttle body sitting on my shelf and it will still cost me another $400 easily to make it a ready to go set.
Maybe I should sell an HG kit I have laying around.. you can make your kit complete
Your making this really complicated.... You have two paths to take.
You can do the more common path and Top Swap. This requires you to purchase Supercharged 3800 Heads, SC 3800 LIM, Gen X (3 or 5) blower, gasket, fluids, whatever else you end up breaking or needing to replace along the way. You get easy power and can hit the 330 WHP range with Heads, Cam, Exhaust, Intercooler etc.
You can do the least common, yet more fun path. Buy GMR Badass's kit. Its an amazing price. This kit includes everything you need IIRC. Bolt it all on, drive, wait for your transmission to go kaboom, buy a TEP Race trans and live happily ever after in the 200whp-800whp range depending on how crazy you go.
I am currently running a T67 turbo on an l32 motor with an XP cam. Fun as hell to drive. My trans is eating the dust and I can feel it, so I am also currently building my own up. 1in GMR chain, 1200hp GMR Turbine shaft, Precision TQ Converter, TEP Stage 2 rebuild kit... You'll want to do some trans upgrades if you plan on going into the 300whp range depending on the miles on your car and how well it was taken care of/beat on.
Then there is tuning: 3 Options in order of worst idea to best idea
Mail order tune: Need I say much? Someone who hasn't ever seen your car guesses at a close conservative tune and away you go. Wont be the best option but it will work.
Buy HPT and start reading: This is what frosty and I did. Lots of books, time and one engine later we now do all our own tuning...well might I add.
ZZP/Or other reputable speed shop local: Install mods, go to shop, pay man, he tunes car, leave happy.
So select power adder, select tune method, pay people, yay go faster.
The NA route is the way of credit card debt and no extra hp
You gain hp... just not a lot lol.Quote:
Originally Posted by theaceofspades
Still a stock gtp will either whoop us. Or we will just keep up with it after a **** ton of workQuote:
Originally Posted by Grimsin
Had a oqcgp.com member race me Ã*nd was dead even with my hv3. overkill 91 octane tune. 2.5" downpipe and hai
Then I got headers and raced my buddies ssei bonne and put a car length on him from 60mph-110mph. Bonnies are Lil heavier with crappie gear ratio though
But ya if modded gtp that's different.
Even headers and a 3.4 will blow an NA out of the water
If you going NA and have a check book the size of texas, go original... swap an LS9 in
Aaron if you read the thread... He has a 4th gen like me... Not so simple to "bolt on" a SC or "buy" a turbo kit LOL. I had to do a bit more work than that.
No, its still easy, you just gotta have the balls...oh and make sure he shuts his hood :)
EDIT: You did it with hand tools, in a weekend and minimal/no welding... its easy.
But 4th gen.... My 'maro is Gen V supercharged and it really was not all that hard at all. Just took some stones and a hammer ;-) pm me if you have any questions on it.
Just because I want this guy to do something interesting, the top swap didn't kill the motor, water did. Total accident.
Quote:
Originally Posted by adecker
yeah yeah yeah the hood thing :-P
yes its fairly easy. just takes a big hammer a hacksaw and some serious stones. lol
The OP has a GP...not an f bodyQuote:
Originally Posted by SnowTh1ef