is the abs light on? if so you'll need the abs pump re homed, or re learned, just went through this myself, cost 40 bucks at a local shop.
and you got two lines to the abs pump where 4 lines go off to the wheels right?
what you can do to bleed all that is to first bleed the master if it went dry, by pumping the brakes like you would to bleed a caliper, but your going to put a wrench on the line off the master then wrap a rag around the nut, after the brakes are pumped up, the pedal is held and you crack the line nut, pedal guy pushs the pedal to the floor, he holds it there till you make the nut tight again, then he can pump the pedal up again. if theres air you'll hear it. do each line 3 or 4 times till just fluid comes out.
then do the same for the 4 lines coming off the abs pump.
then redo the wheel calipers.
dont let the master go dry while bleeding or you'll have to start all over again.
