How to replace power steering pump.
|
How to replace power steering pump.
take off old one and put new one on.
Jack and support the front of the car.
Remove passenger wheel and splash shields
Going through the pulley of the pump, use a 13mm socket to remove the two bolts at 12 and 6.
Carefully remove the wire connector that should be attached to the back of the pump.
Moving the pump around, find your best way to remove the hoses.
Sneak pump out
Install new pump.
i took the hoses off first, left a bucket under the it to catch the old fluid that will leak out.
then you will need a p/s pump pulley puller and installer.,,,same tool to get the pulley off and back on the new pump.
« Previous Thread | Next Thread » |
Tags for this Thread |