was wondering what all had to be done to change a intake gasket. I've never really worked on these newer motors so im confused.
|
|
10-01-2012
was wondering what all had to be done to change a intake gasket. I've never really worked on these newer motors so im confused.
10-01-2012
heres that vid i told you about, you just need a gasket list really. a torque wrench and a simple socket set to get it done.
and new injector O rings are a good idea as well.
https://docs.google.com/file/d/0B5O9...hl=en_US&pli=1
10-01-2012
You pull the fuel rail, then the supercharger and related wiring, then take off the LIM, then clean **** up, then install new gasket, then install cleaned lim and new coolant elbow, then new sc gasket, then put fuel rail back on and your done.
10-01-2012
and dump a quart of oil in the lifter valley to wash out any coolant, put it all back together. then do a oil and filter change.
10-01-2012
well i was close lol
10-01-2012
just one step you missed lol
you got all the hard parts covered tho.
10-01-2012
Thank's guys. If i have any problems i will be sure to get back on here and ask for help!
10-01-2012
Its easier than it looks
10-02-2012
I don't know why you have to wash coolant out. You didn't tell him to dump any in the lifter valley (don't do that BTW). I don't typically get any in the valley and therefore don't rinse. Only rinse if you get a decent amount in there. And if..you get that much in there..you'll be doing three or so oil changes to get it all out.
10-02-2012
Found out where the leak was coming from, it was one of those coolant elbows below the supercharger. it think there are two of them that's what my friend
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
