|
|
10-08-2010
i put in a boost gauge .put a t in the back off the motor in the hose that goes under the snout to the rear toward the firwall and im only getting 2 or 3 lbs of boost showing on my guage but now when i drive more than 40 miles my car has trouble ****ing into 2 and acts funny when i stomp on the gas...whats the deal..?
10-08-2010
Im not exactly sure that installing the gauge has messed up your tranny.
10-08-2010
Check for a vacuum leak 2-3lbs does sound right
10-08-2010
You wouldn't happen to have a 97 would you?
Originally Posted by TLSheff
10-11-2010
no its a 2000
10-11-2010
2-3 psi is to low, are you geting vac? if you are it should be around -18, my boost is around 7psi
10-11-2010
Why a 97?
10-11-2010
97 trans are not as 'strong' as 98+.. 03 being the best of the 97-03's
10-11-2010
The 97 GTP trans are the same as the rest. the 97 GT was vac controled and not the best.
10-11-2010
were did every bodie else hook there boost gauge up at
10-11-2010
Look at your Blower snout there is a small black vac. line under it. tap it there.
10-11-2010
ok thank u josh..i think i prolly got a vac leak cause my trans was fine before i started to mess with the vac line i its fine till.i drive about 10 miles then when i take off getting on the throttle it has trouble shifting into 2 thats it so im sure the vac line has somthing to do with it..
10-11-2010
if you need any help just let me know.
10-11-2010
well im going to retry it and c how it goes
10-11-2010
some vac leaks will cause late/long shifts. thats ur prob.
Originally Posted by SuperSport
10-11-2010
That was my thought behind the question
Originally Posted by TLSheff
10-11-2010
As he said.. I had a vac leak and wouldnt shift till i took my foot off the gas.
10-11-2010
good thats my problem..thanks to everyone..that is what is going on late shifting unless i let off the gas
10-11-2010
just for safe measures in case u get it scanned.. u will probably have a throttle position sensor code. dont do what i did and buy 3 TPS's trying to fix the prob... my rubber T was popped completely off the lower intake mani... right under blower snout..
Originally Posted by SuperSport
12-22-2010
i just got a boost guage and the vacuum hose with it.. when i tap into that hose under the snout do i just cut a hole and put the hose in, or should i get some connectors
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
