3.4 pulley installed!!!!!

**a98gtp4u** · 09-03-2009

Just got done putting my car back 2gether. Changed out the lim gaskets and installed a rebuilt supercharger with a 3.4 pulley on it. I got a 3 inch catback split 2 2.5 inch dual turbo mufflers, 180 stat, al 104 plugs, 8mm accell wires, short ram intake, optima red top and now with that pulley the car is really flying. Cant wait to find some ricers on the road.

**blueguy** · 09-03-2009

Great job getting it back together...have fun tearing it down again as you have no flow mods for a 3.4" pulley.

FAIL.

**Bio248** · 09-03-2009

true story. you need exhaust work yesterday.

**OH4CompG** · 09-03-2009

With the 104's and the 180 stat you should scan it and see where you're at with knock. If you still have any I would consider getting or making a CAI and/or a front powerlog/headers.

**TheOtherNick** · 09-03-2009

I bet he has 10*

**a98gtp4u** · 09-04-2009

Well i talked 2 da guys from zzp and they said i didnt need prob any mods 4 a 3.5 pulley but i wanted more power so he recommended the 3,4 pulley as long as i do the mods that i have listed. Thats y i went with a 3 inch catback instead of 2.5 all the way back.

**skidoojames151** · 09-04-2009

get a PLOG or headers...NOW!!! and a Fenderwell intake too...ur car will not last as is...and the catback didnt do anything btw

**carl06GT** · 09-04-2009

never listen to zzp for modding advice. fail

**superv6** · 09-04-2009

yeah sorry brother, but never listen to any companies advice. they are just tryin to sell you something. but, good job on gettin her back together man.

**GTPJOE90** · 09-04-2009

headers and 3in dp NOW!

**skidoojames151** · 09-05-2009

you dont need a DP with headers....they come with them

**silverstreak** · 09-05-2009

Originally Posted by skidoojames151

you dont need a DP with headers....they come with them

ok

**BoostJunki3** · 09-05-2009

3.4 + no flow mods....your l67->

**silverstreak** · 09-05-2009

YouTube - I-57 DIXMOOR,IL FIRE/RESCUE Car Fire

**KawaFord** · 09-05-2009

Originally Posted by silverstreak

YouTube - I-57 DIXMOOR,IL FIRE/RESCUE Car Fire

**blueguy** · 09-05-2009

That pretty much sums it up.

And you are on here and after everything that is said about ZZP and you listen to their advice...cmon man, were here to help you not sell you a product that will "GUARANTEE 20 HORSEPOWER" for $50...sure the pulley might have made your car a bit faster...but you aren't scanning for knock....

**TheOtherNick** · 09-05-2009

Ok lets put it this way I had a wizaired intake, 1.9 rockers, ported blower, 180 thermo, 104 plugs, 3"dp, zzp pcm and have about 7* of knock. So with your mods and pulley you are just asking to blow it up then have to look for a new block. Either buy some supporting mods or take the smaller pulley off. You need to scan bad.

**OH4CompG** · 09-05-2009

Originally Posted by 01GTP

Ok lets put it this way I had a wizaired intake, 1.9 rockers, ported blower, 180 thermo, 104 plugs, 3"dp, zzp pcm and have about 7* of knock. So with your mods and pulley you are just asking to blow it up then have to look for a new block. Either buy some supporting mods or take the smaller pulley off. You need to scan bad.

If you had that much knock with those mods you have a REALLY bad tune. You don't need to throw mods at a car to reduce knock. Just tune it properly and you will get results.

**blueguy** · 09-05-2009

Originally Posted by OH4CompG

If you had that much knock with those mods you have a REALLY bad tune. You don't need to throw mods at a car to reduce knock. Just tune it properly and you will get results.

You can't just TUNE out a 3.4" pulley with no flow mods. It's not happening.