pbrumfield2007 
(13 years owned) 1996 SE
The windows stop working- then they work. Finally they stopped all together.
1.) Power (+12v) exists at the brown wire from the circuit breaker. (Good)
2.) Black does not read continuity to ground (if that is ground) This wire is unidentified (not on schematic) and I tried this wire to ground with no effect.
3.) I can attach 12v to each motor and operate (no problem)
4.) There is another brown wire that is unidentified (not on my schematic)
This brown wire on 1995 F-body show this wire going to the coolant level sensor- and I say why? I assume a feed?
5.) When I press the switch the (illumination) light comes on- but no window
6.) New switch purchased still no window!
