Thread: Power Passenger Seat conversion

Adding Power seat on the passenger side

Power unit from the drivers side


This is the reat section beside the console
A hole needs to be drilled to change the offset from the drivers side to passenger


This is the front outer section drill new hole for offset


This is the front iner section drill new hole for offset

Make angle iron for offset of the reat outer section



Had to open up the front inner of the seat frame


And here is the seat all bolted up


And now the side plastic for the switches

Made a template from the other side and cut out the plastic for the power seat switches

Used epoxy to glue the switches in and yes the controles will work normaly

if you want the re wriring instuctions let me know

Here is the finished seat with the side






ORIGINAL WIRING:

BEIGE = FORWARD
GREEN = BACKWARD
GREY = RAISE FRONT
WHITE = LOSER FRONT
PINK = RAISE REAR
VIOLET = LOWER REAR

MOVE THE FOLLOWING:

BEIGE TO GREEN AND GREEN TO BEIGE

GREY TO PINK AND PINK TO GREY

WHITE TO VIOLET AND VILET TO WHITE

INSERT A SMALL FLAT SCREWDRIVER WHERE YOU SEE THE U SHAPE
TO UNLOCK THE PINS YOU CAN SEE THE TAB IN THE PHOTO

FOR THE LUMBAR I DINT CHANGE ANYTHING

GOOD LUCK

Now this is an awesome how to, thanks for posting this up.

good write up sticky sticky sticky

Cool writeup I would have had to paint it though. The rust would have drove me nuts!

Hey I know this was a longg time ago and you might not even be on here anymore BUT I was wondering if you still had the pictures from this cause there not on here for whatever reason and I'd love to do this.. Thanks!

Hey guys yes this was a long time ago and since I no longer own GPs had 4 of them over the years

but I did come across the pics for this conversion

if you send me your email I will send you the pics

Mark

Originally Posted by Mark_PontGTP

Hey guys yes this was a long time ago and since I no longer own GPs had 4 of them over the years

but I did come across the pics for this conversion

if you send me your email I will send you the pics

Mark

Hey Mark did you ever send those pictures? I PM'ed you my email but never got anything. If you don't have them it's cool I just wanted to do this during summer. Thanks!

If you get a copy of them please post them up, I've been wanting to do this to my Passenger GXP seat. I'll probably buy everything next JY trip so I might just try to figure it out without the pics...and I'll take pics along the way, lol.

I found the pics
I will send them out this weekend

sorry guys but im not on here to much anymore since I no longer have a GP

Now worries man, anything you can offer will help, want me to PM my e-mail?

Originally Posted by Mark_PontGTP

I found the pics
I will send them out this weekend

sorry guys but im not on here to much anymore since I no longer have a GP

Thanks man I got them! Much appreciated for them looks like I have a summer project heh

Originally Posted by KoldAsIce

Thanks man I got them! Much appreciated for them looks like I have a summer project heh

Any chance of reposting the pics here for the rest of us? Mucho thanks!

Whats your email to many to post man

I'll PM you my e-mail, then I'll post them up.

K guys, I have the pics, please remember. I have not done this yet. I will be doing it with a 04+ seat eventually, so I will be able to answer the questions then. I also have higher res pics, but these have captions.
















The pictures were number 1-15 so thats how I posted them, I hope the line up with the OP's write up.

Thanks!!