|
|
08-06-2014
I think I have read about it early on is this thread and a few people say the data in not transmitting but I hooked a jumper from the DLC to the #9 pin on the digital DIC connector and still nothing, I could possibly have a bad DIC. But thanks for the reply.
08-06-2014
One thing when you go from gtp to gt or the other way, there is a mod. I am on my phone, when I get to a pc I will try and find the thread. It only has to do with the trac light. From what I read the flashing 0 is a data link issue. Could be bad DIC, just double check the wiring, most tap into the data link on the odb-ii connector, to be sure they got the right one. Most of this is what I read.Originally Posted by natshr
08-06-2014
I'm going from a gtp to a se and the traction control works and the light cycles on and off as I press the button and actually works at the wheel level, but Im starting to have to lean towards a bad DIC. But thnx for the reply, gonna hit the junkyard up this weekend and hopefully get lucky and find another
09-30-2015
I know this is an old thread, but what color is the HUD display? the picture on page 6 I think showed it as green. Are all HUDs green and if they are do they look out of place with everything else being red?
10-12-2015
Quick question - anyone know off hand what size the bolts are to remove the HUD? I'm headed to the junkyard tomorrow to pull one out of a car and the less tools I have to lug with me the better!
10-12-2015
Probably 10mm
Sent from my iPhone using Tapatalk
10-12-2015
Two clips in front, two 7MM in rear. They may also haxe T15 or phillips on the head as well. Pics included here:
http://www.grandprixforums.net/threa...9-GT2-shown%29
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
