Re: How to program key fob
The only thing that seems odd is that both batteries test over 3 volts on my voltmeter, yet 2 remotes both don't work - that seems odd. Anyway, I'll check that. I think I might stop at AutoZone - I think they have a unit by their counter that tests if an RF signal is coming out of the remotes at all - that would at least narrow it down a bit further where the scope of the problem lies.
Re: How to program key fob
I checked both remotes at AutoZone and their test unit confirmed that the units are producing an RF signal. Since it is 2 units not working and the common thing would be the unit on the car, I'm guessing that must have some issue with it. Has anyone else had this issue or can point me in the right direction for information? Thanks!
Re: How to program key fob
I am having the problem as wraith888. Are there any solutions?
Re: How to program key fob
Replaced BCM or body controller, matching the part numbers, fixed my RKE.
The multiple beeps went away.
I had eight beeps before and I could not program the key fob.
FYI - The BCM does not control the sunroof or the rear doors.
Re: How to program key fob
Does this work for a 2008 base GP?