Did I read your posts correctly that if I have an 01 GTP and want to try a used module first that I don't need to worry about the 5 rule thing? I just need to stay GTP to GTP?
|
|
02-01-2015
Did I read your posts correctly that if I have an 01 GTP and want to try a used module first that I don't need to worry about the 5 rule thing? I just need to stay GTP to GTP?
02-02-2015
I'm not sure what the 5 rule thing is, but there are several compatible years that you can use to replace your abs module. another option is to get the electronic portion rebuilt, its like 160 and www.modulemaster.com out of moscow idaho does it. you just have to make sure your module is what is causing the problem because modulemaster cant test the module before or after.
02-03-2015
In theory because your year model is compatible. But honestly man, I took an ebcm from the same year and model as my 03 and paid attention to the bosch serial number and a used one did not work for me. But I've heard of times when it does work, so if the cost of a used one is little to nothing I say go for it.Originally Posted by sparkydog
Hands down, www.modulemaster.com is the way to go though.
02-03-2015
Cheapabs.com is also another option
Sent from my iPhone using Tapatalk
04-29-2015
bought a used unit from ebay because mine wouldn't communicate with a scan tool. the used one i bought was supposedly from a 2000 gtp which is what i have. the numbers were different than the new used one. i couldn't find the #88894774 on mine or the one i bought , .. installed the new, used one ...still got abs , traction control and ses lights on. haven't tried scanning it yet.
04-29-2015
There's a guy on eBay they rebuilds them for $40-50 might be worth just having your checked out and repaired and get your money back for the other one you brought.
Sent from my iPhone using Tapatalk
04-30-2015
I used this guy to fix my ABS module on an '01 GTP. It worked great!
04-30-2015
There are a lot of great services out there to rebuild them if your not comfortable doing it yourself.
05-01-2015
it's too late for a return. only got 30 days and i took too long to get it installed to determine it didn't help. just realized i didn't unhook the battery during removal / installation... don't know if that could have affected it...someone suggested a fuse or relay. looking in the owners manual , all i see abs related is a 10 amp fuse marked ac clutch, abs ingnition. the ac doesn't work , could this fuse being blown stop a scan tool from communicating with the ebcm ? also i seen ground wire as a possible culprit. anyone know where the ground is ?
05-01-2015
good news. went and had a scan redone (with the same snap on) and it did communicate this time.PROGRESS !!!
now it's throwing the c0035 code , which from what i gather is the left front wheel speed sensor. i've already replaced both front hub assemblies with timkens , so now HOPEFULLY a new wire harness will solve the problem . i'm replacing both just for good measure.
05-03-2015
Seal them harnesses up real good or your just looking into future issues.
05-04-2015
would you suggest something other than the shrink tubing ?
05-15-2015
well i replaced the left front harness because it was throwing the c0035 code. started car abs/tc lights still on. rescanned and it gave the c0040 code ...right front...replaced right harness and now i have no abs lights and the TC works as it should ...YAY..
06-29-2015
Are there any threads out there that discusses DIY repair?
06-30-2015
what exactly are you trying to repair ?
06-30-2015
The EBCM
06-30-2015
not that i'm aware of...try youtube. i found a used one on ebay for a hundred bucks...it worked
11-10-2015
I replaced my ebcm few months ago no lights everything works as should. I replaced the power steering pump with one from O'Reilly 3 times while the ebcm was bad and the rack also.. now street the ebcm I have no lights but power steering is stiff and noisy at low speeds under 20mph, could the ebcm messed with the pump or should I try another pump??
Sent from my SAMSUNG-SM-G870A using Tapatalk
06-02-2017
I have an 04, so I can just try pulling a EBCM from any 99+ as long as there's no 5 in the serial number, or can I only pull 04+? I will check my EBCM number tomorrow, and I could take pictures if anyone needs a guide made.
I have C0050, C0095, already replaced my hub and wiring.
06-03-2017
Link says all 98-07. That's where I had mine repaired. Matt fixed it and got it back to me right away.
http://www.cheapabs.com/vrpontiac.html
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
