Thread: How to remove a transmission

Page 2 of 6 FirstFirst 1234 ... LastLast
Results 21 to 40 of 110
  1. #21  
    SE Level Member
    Join Date
    Oct 2012
    Location
    Warner Robin, Ga
    Posts
    11
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    My main worry was do pull everything or just go for the trans and does it come out the top or bottom and what booby traps would I have to disarm to get the trans disconnected to the engine
    Reply With Quote  
     

  2. #22 Re: How to remove a transmission 
    SE Level Member
    Join Date
    Nov 2008
    Location
    Central NJ
    Posts
    112
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I'm right in the middle of dropping my trans and I think I have everything unbolted (including the backward bolt) and I'm trying to pry the trans away from the engine but it's not giving. I don't want to use too much force and break something else. Are they going to be stuck together pretty good?
    Reply With Quote  
     

  3. #23 Re: How to remove a transmission 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    did you take the tc bolts off, they tie the flex to the tc. 3 bolts.

    and theres a bracket from the trans to the engine you need to take off.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  4. #24 Re: How to remove a transmission 
    SE Level Member
    Join Date
    Nov 2008
    Location
    Central NJ
    Posts
    112
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I found the bolt I missed. I didn't realize one of the grounding bolts toward the front of the transmission was also a bolt. I thought it was just a stud for the ground wire. After looking at my new trans, I realized it was also a bolt that needed to come out.

    Thanks
    Reply With Quote  
     

  5. #25 Re: How to remove a transmission 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    yeah that one hides in plain sight lol

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  6. #26 Re: How to remove a transmission 
    SE Level Member
    Join Date
    Jan 2013
    Location
    Canada
    Posts
    6
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Just got a grand prix that needs a new transmission. I was told that it's not worth doing the swap myself because I'd need to "drop the cradle" (too much work). It doesn't seem like that's the case according to your walkthrough...am I mistaken?
    (Yes, I do know what a cradle is...lol googled it)

    Thanks!
    Reply With Quote  
     

  7. #27 Re: How to remove a transmission 
    SE Level Member
    Join Date
    Jan 2013
    Location
    Canada
    Posts
    6
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Also, would a transmission from a GTP (HD series) fit in a GP? I don't see why not
    Last edited by unhipcrayon; 01-17-2013 at 12:30 PM.
    Reply With Quote  
     

  8. #28 Re: How to remove a transmission 
    Turbo is the way to go. BillBoost37's Avatar
    Join Date
    Jul 2009
    Location
    W Spfld
    Posts
    26,815
    Thanks (Received)
    53
    Likes (Received)
    90
    Dislikes (Received)
    1
    Well Crayola... It's my opinion that most work on these cars is simple. Hence why there was a pattern of the word "ea sy" (without spaces in all my how to posts. If you break things down and say "remove this with x tool, or that with such tool". Reading through a guy can see if there is a tool needed he doesn't have. That's what I've done. If you have the place, the tools, you should be able to do it. Most people find an engine or trans swap, first time around will take 6-8 hours. Which a day of your life vs $500-$1000 to me ...it's worth it.

    On the trans, you can swap an HD into a non-hd. Keep in mind that the passenger axle is shorter on the HD and the gear ratio should be corrected in the pcm.
    I drink..so consider that when reading my posts.

    2010 Audi A6 Dual IC's
    Reply With Quote  
     

  9. #29 Re: How to remove a transmission 
    SE Level Member
    Join Date
    Jan 2013
    Location
    Canada
    Posts
    6
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I've done a tranny swap in a GMC safari and it wasn't too bad. I don't mind the work if it means I save $1000+
    Thanks for the help!
    Reply With Quote  
     

  10. #30 Re: How to remove a transmission 
    Perma-Banned! JK LOL Explicit_Spade's Avatar
    Join Date
    Dec 2007
    Location
    Omaha, NE
    Posts
    7,921
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by BillBoost37 View Post
    On the trans, you can swap an HD into a non-hd. Keep in mind that the passenger axle is shorter on the HD and the gear ratio should be corrected in the pcm.
    Putting in an HD trans in place of a non-HD will require a tune for the gear ratio change as well. If you wanted a little extra strength without a tune, you could do an HD Differential swap.
    Quote Originally Posted by W-Body Store
    Remember, GM engineers didn't take into account your need for speed.
    Daily Driver: 06 Grand Prix GT / 9.4:1 CR / IS3 Heads / Ported Gen V / ZZP Headers / HPT Pro / Pulleys: 4.25, 3.8, 3.5, 3.4, 3.2, 3.0, 2.9, 2.7
    Projects: 86 Monte Carlo SS / 98 Sonoma / 74 Honda CB750
    Reply With Quote  
     

  11. #31 Re: How to remove a transmission 
    SE Level Member
    Join Date
    Jan 2013
    Location
    Canada
    Posts
    6
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Thanks for the quick replies! Few more questions.

    Based on your illustrations, it seems like you had to remove the engine. Do I need a engine lift (cherry picker)?
    Reply With Quote  
     

  12. #32 Re: How to remove a transmission 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    you dont take the engine out, you want to hang it n place. you can chain a cherry picker to it, aka engine hoist.

    or what bill does is lay a 4x4 from the hood latch to the windshield cowl, take the rubber off so it dont get smashed, and 2 short cut 2x4 pieces to put under the 4x4 by the hood latch, then bolt a chain to the engine lay it over the 4x4, then bolt it off to the other side of the engine. this way when you drop the sub frame, the engine will be hanging in the engine bay.

    Last edited by Scottydoggs; 01-19-2013 at 12:11 PM.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  13. #33 Re: How to remove a transmission 
    SE Level Member
    Join Date
    Jan 2013
    Location
    Canada
    Posts
    6
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Awesome thanks!

    I'll be bringing the car in tomorrow...can't wait to get it started.
    Reply With Quote  
     

  14. #34 Re: How to remove a transmission 
    SE Level Member
    Join Date
    Jan 2013
    Location
    Canada
    Posts
    6
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by BillBoost37 View Post
    On the trans, you can swap an HD into a non-hd. Keep in mind that the passenger axle is shorter on the HD and the gear ratio should be corrected in the pcm.
    Could you elaborate on this?

    Secondly. I have a scanner, but I doubt this sort of tuning can be done with mine so would I need to take the car into a shop to have the gear ratio corrected in the pcm? If thats the case, would I be able to drive the car without any issue to the shop?
    Reply With Quote  
     

  15. #35 Re: How to remove a transmission 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    you need HTP or another pcm programming program to re set the gears in the cars pcm. most shops dont do this, you need a local who tunes, or a speed shop with a dyno type place to do it. like a shop that builds and tunes cars. ( modded cars, not the corner mechanic)

    its easiest to just put the same kind of trans that came out back in.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  16. #36 Re: How to remove a transmission 
    SE Level Member 01SilverGTP's Avatar
    Join Date
    Jan 2013
    Location
    Ohio
    Posts
    11
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    can u take the tranny out without taking the engine out?
    Reply With Quote  
     

  17. #37 Re: How to remove a transmission 
    SE Level Member
    Join Date
    Nov 2008
    Location
    Central NJ
    Posts
    112
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    You don't need to take the engine out. Just follow Bill's directions and you should be good to go. I followed his steps and it worked out for me.
    Reply With Quote  
     

  18. #38 Re: How to remove a transmission 
    SE Level Member 01SilverGTP's Avatar
    Join Date
    Jan 2013
    Location
    Ohio
    Posts
    11
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by Bandit1228 View Post
    You don't need to take the engine out. Just follow Bill's directions and you should be good to go. I followed his steps and it worked out for me.
    thanks. my tranny blew christmas night. my luck. im trying to figure out how to do this. my dads helping me.
    Reply With Quote  
     

  19. #39 Re: How to remove a transmission 
    GT Level Member Shiftingshaddow's Avatar
    Join Date
    Feb 2012
    Location
    KC
    Posts
    355
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    i've done this both ways on two different vehicles that are essentially the same underneath. the first was a silhouette mini van that was done on a lift in a shop-transmission only through the bottom, dropping the cradle.

    i did my gtp out the top pulling the engine and transmission with it with a cherry picker.

    out the top was easier.

    both vehicles 4t65e hd transmission, same cradle, axles, pretty much everything same set up.

    we could have approached the cradle method better and utilized the lift better by putting the sub frame down with the transmission still in it onto the floor and just lifting the van up. but without a lift that wouldn't work, really. the cradle is heavy. the transmission is heavy. bolting it back to the engine was no small task, even with the transmission jack. we were standing under it, not lying down. we were noobs and we got it done but it was heavy lifting.

    out the top was so much easier. the engine hoist did all the lifting and we didn't have to drop the cradle. unbolted the transmission from the engine out of the car on a workbench while still connected to the hoist. very little lifting at all.

    plus, with the engine out you can change gaskets, do tune up, whatever maintenance you want out of the car with no obstruction.

    just a suggestion.
    2001 GTP Special Edition
    ZZP DP with Cat, Open Cone Intake, ZZP 1.0 PCM, 3.4 pulley, AL 104s, Rocker Panel Delete.....
    Reply With Quote  
     

  20. #40 Re: How to remove a transmission 
    GT Level Member Tony Mendez's Avatar
    Join Date
    Aug 2012
    Location
    Somerset WI
    Posts
    272
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I drop the engine/trans/cradle as an assembly out the bottom. I built a cradle dolly so I can move the assembly around the shop and over to the tear down bench. I have the benefit of having a shop with a hoist to do the job this way. I would think it would be difficult to do this on jack stands but if a guy rigged up a ATV lift, it would make the job easier.
    Reply With Quote  
     

Page 2 of 6 FirstFirst 1234 ... LastLast

Similar Threads

  1. How To Remove Transmission Help!
    By Hixc in forum 1997-2007 4 speed Automatic (4T65E) (4T65E-HD)
    Replies: 74
    Last Post: 10-10-2014, 08:59 AM
  2. how to remove a 97 gp transmission?
    By 1997gp in forum 1997-2007 4 speed Automatic (4T65E) (4T65E-HD)
    Replies: 1
    Last Post: 07-13-2009, 12:10 AM
  3. how to remove a 97 gp transmission?
    By 1997gp in forum General Tech Discussion
    Replies: 6
    Last Post: 07-07-2009, 11:26 AM
  4. how do i remove the transmission
    By EMerola in forum Pre-1988 3 speed Automatic TH-125C (3T40)
    Replies: 5
    Last Post: 12-09-2008, 07:28 PM
  5. How Can I Remove This ?
    By stlmo_gtp in forum Visual/Body Modifications
    Replies: 15
    Last Post: 04-23-2008, 01:18 PM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •