The add a circute is to big for where the fuse came out of
Printable View
The add a circute is to big for where the fuse came out of
Then you didn't buy a mini fuse add a circuit
They only had the one size, Didn't know they had smaller ones. Guess ill have to go back tomorrow and buy a new one.
Thanks
Get the one that has the same size prongs as the fuse you pull out
Make sure you have a mini-blade add a circuit. And the extra wires are for adding inputs to the gauge. I.E. Oil pressure
Edit: Didnt realize there was a second page and 99 already gave the correct answer.
I have a problem... I just received my aeroforce... I passed the power wire to the fuse box, and passed the wire to the OBD2 (didn't plug it yet).
I plugged my power wire in the PGM and fuse and as soon as i plug the obd2 my gauges and radio turn on without even having the key plugged in!!
I even tried the radio fuse and the same thing happens...
whats the problem!
Did you remove the jumper on the back?
yep and no change... what those that jumper do?Quote:
Originally Posted by KeithGTP03
It's for a 5v system. If your OBDII puts out a constant 5v, you leave the jumper in and dont wire the 12v signal. That may be your issue. I needed the 12v. Try running it with the jumper and without the 12v.
Is your 12v fused? The add a fuse.works best because the aerosols is picky on its 12v
Android Fire
Most of our cars will need the 12v.
Mine did. If it was just ran off the obd2 then it would shut off after a couple minutes or wouldn't turn on with the car.
I plugged mine directly in the OBD2 with the jumper on and i had to manually turn it on and it would turn off when i turned the car off but it wouldnt turn on again if i started the car (the annunciators flash)
I tried running the power wire to the PGM fuse (kept the jumper on with the wire wrapped arround the 2 connectors) and as soon as i plugged my OBD2 my A pillar gauges and my radio would turn on without even having the key in the ignition...
any one has pictures on how the back of the gauge should look?
^^^^^ X2 please for back of gauge pics
Owners manual?
Comes with a pigtail for analog ins and 12v power.
Connect 12v to switched power.
Also remove jumper when using 12v and I would not suggest connecting to mall/pgm fuse.
just picked up my aeroforce today (used) i dont have an owners manual, i need to run a power wire for it so if anyone can help me out that would be great.
Red wire is the power wire correct?
what is the white wire for and what is the green one for?
another question is when i remove the jumper i leave it out? why do you leave it out?
any help would be great i want to get it hooked up today, im gonna run to autozone and find an add-a-fuse now
white and green you do nothing with.
and just run the wire like he does.
I use the radio fuse and just run the wire through the car to the gauge. And just pull the jumper out if it has one and thats it, its not needed for our cars.
so i leave the jumper out run the red wire to the add a fuse and plug in the obd2 port and thats it?
yes