How does the UV look? Been curious because I kinda wanna switch to DD's Full Kit. Maybe UV in the foot wells as.....well?
|
|
11-24-2010
How does the UV look? Been curious because I kinda wanna switch to DD's Full Kit. Maybe UV in the foot wells as.....well?
12-22-2010
The camera doesnt do it justice
Thats the only LED one, my camera doesnt pick up the red too well, the rest are just red bulbs not LEDs.
Last edited by EJRJR91; 12-22-2010 at 12:11 AM.
01-03-2011
Just got all of my LED's installed from Diode Dynamics. The footwells are blue and the rest of the car is done in white. Really happy with them.
01-06-2011
Just did this today love itI had a picture but it was really terrible quality so I decided not to show...Thanks for write up
04-17-2012
Real quick if anyone is online, how do i remove the pivot clip on the rear lights? I'm having a lot of trouble with it and don't wanna break anything. I have the cover swiveled down right now but I'm stuck like that and would like to get these last LEDs in before the sun goes down.
Also, i found it easier on these rear lights to use a thin dull knife to pry the cover down.
04-17-2012
nvm, i thought it was a T shape in there. I got them out.
06-11-2012
i have a question...how exactly do you remove the little light bulb... i was trying to remove the one in the foot wells but i couldnt get it.. i tried spinning it but the the little plastic thing goes into the car..do i just pull down on the actual lightbulb glass part?
06-21-2012
Sorry I un-subed a long time ago. Eddie, yes, just pull the bulb straight down. It will feel like it might break because they are in tight, but just get a good grip and pull straight down.
06-21-2012
when i was putting the 194 bulb into the rear socket on one the socket unclipped and slipped into the headliner and doesnt have enouge support so i cant plug in the bulb, anyone have this problem? anyway to fix it?
06-21-2012
Can't you just pull the headliner down and grab the clip back?Originally Posted by Lishap
06-21-2012
i cant just "pull" the headliner down, theres really not a spot to jus pull it down.
06-21-2012
Take the back pillar down. Then in the middle where your seat belt is attached you can take that off. Once those two things are down if you take the brackets off from the headliner (for the 194 bulb) the headliner will come down then.
06-21-2012
oh alright thanks a lot.
06-21-2012
I did the foot well ones except I have mine on a three stage switch. Position 1 is off. Position 2 beats to the music beat. Position 3 is always on. I plan on hooking them up to an arduino I have laying around and adding many more modes like chase and stuff
06-25-2012
What'd you use to have them pulse to the music?
06-26-2012
Rear deck speakers...works really well with monsoon audio
12-09-2012
phpVPo6M4PM.jpg
The owner before me added these in, I have no clue how they are installed though and have never checked. I like em though!
12-11-2012
this is fairly easy, i went a different direction with my truck
white led Courtney lights
then i added 200 blue led's everywhere i could think of and ran a separate switch
i even had led bed lights
Originally Posted by TLSheff
12-18-2012
How'd you get everything out without breaking it? Maybe my stuff is just too brittleJust got all of my LED's installed from Diode Dynamics. The footwells are blue and the rest of the car is done in white. Really happy with them.
12-19-2012
It's really just a matter of taking things slow. Also be careful in the winter time because that plastic becomes much more brittle and difficult to work with.How'd you get everything out without breaking it? Maybe my stuff is just too brittle
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
