how to make your projectors worth the money for cheap...

**BoostJunki3** · 08-30-2009

first do this-ClubGP Message Forum troubleshooting

then below and you will have NO BOUNCE

i adjusted mine so they fit nice and i re did the weather stripping on them fukk the bs weather strip they come with i now have a single piece running around the corners and all the way under neath the lights (automotive weather stripping from lowes/home depot)....no bounce AT ALL, tight fit, no big gaps just small ones on the inside no more than the stockers tho...they are perfect now....def glad i invested in them...

i especially like how my thicker strip tightened up the corner fit.

**Slueth66** · 05-08-2010

just followed this "how to" the other day, helped a lot. accidentally cut to short

but created some new cutoffs. made it way harder than it should of been but everything turned out alright.

**GTBabyGirl** · 06-03-2010

i know this is an old thread but do you notice with yours like a cut off on vision?

**Tommyp2010** · 01-01-2011

What?

**gtpinsc** · 01-02-2011

u talkin bout low beams?

**BoostnBlackGTP** · 02-13-2011

yup i know get pissed at me if u want to... But is there any other places with instructions tot he no bounce mod? bcuz there is no pics in that one...

**mikeygan17** · 03-07-2012

The weather stiping idea works pretty dang good!!!
if you ever break your projector's brackets, fix them with oem brackets from the scrappers;
your going to have to cut the stock one and use a plastic molder to bond it together, replace all part you want to beef up

if the cleat coat is peeling, wet-sand and buff/polish then then re-apply some clear coat, should work good

and the bouncing if there still is some: the oem bracket would've fixed most of it, the rest can be done by making sure all the screws and bolts on the projector/bracket are tight, then there is a little mod that i am planning and it is currently a secret but will be revealed sometime in the near future, it will give off a better look and eliminate the bouncing left

**gtpeddie** · 03-09-2012

yea i used weather stripping on my lights i got he same exact ones its the one way to go with these lights !

**Konvinced89** · 03-20-2012

i didnt see this before when i was trying to fix mine, wouldve helped alot but i got zipties, and basically aimed the lights a little lower than i wanted, then tied the bracket that holds the light's vertical adjustment to the car's metal bracket that the housing sits in. it's a little ghetto but it works okay, i only see them bounce over really harsh bumps or continuous rough sections of road.