Thread: Halo LED Projector Headlights 97-03 Grand Prix

Originally Posted by Maloro619

Hey the wattage is 35w its the 6000k HID kit H3 converison kit. which i bought with the black led halo projection headlights which looks damn sweet on my car, but i ran them the other day didnt really smell the plastic burn smell, soo maybe it just needed to burn a lil residue off or something?

Maloro619,
I am sorry that this had happened, that's kind of unusual for the situation. Please contact me and let me know if the melting/burning is really happened because it's abnormal to have the smell if everything install properly.
Please email our technical support for further assistance and our tech team will make sure you get the headlights and HID kit installed without any problem.
Our email is return@dashzracing.com
Sorry for the inconveniences.

Well i dont smell it anymore, however isnt the HID kit suppose to be brighter than bulbs that come with the projection? cuz my low beam is brighter then my #)$)#* hid converison kit.......

Your HID kit is supposed to replace the bulbs that are in the low beam. How can you compare both of them at the same time?

Can i still get the projection lights at the group price? If so how much for the smoke projection lights with hid kit, hid fog lights, smoke led tail light kit? Thanks

Originally Posted by nawarkk

Your HID kit is supposed to replace the bulbs that are in the low beam. How can you compare both of them at the same time?

i installed them just at spartan had told me to. on the back of the light i cut a hole in the rubber, fed the hid bulb through and installed it.
i flick my high beams on and all i get is the hid bulb, not both the hid bulb and the other bulb also

so yes i can comepare them
because
when my lowbeams are on ( meaning the stock bulb that came with the projection lights) i only see the whiteness/led corner lights on it and rings.
BUT
when i click my highbeams on, (HID kit) its like just a blueness type but its like a VERY VERY VERY low beam in a stockheadlight lamp.

so either 1. my kit is foobar. 2. the wiring isnt tottally secure. 3. the kit sucks. or 4. well there is no 4.

sooo
imma check the wiring, if its all secure and good, then the kit isnt good... but ill double check.

Well.. if you got an H3 kit, that belongs in the low beam. If you got an H1 kit, that belongs in the high beam.

The low beam is the one with the projector lens. The one with the reflector is the High beam. Sounds like you put the H3 kit in the High beam area, where it does not belong.

It belongs in the Low beam area and should replace your stock headlight bulb. I think you wired it wrong because the way your describing it to me sounds completely in correct.. at least to where you wired it lol

Honestly, are these headlights worth 200 bucks. I have read 2 reviews and had very mixed feelings, seems like they are more trouble than there worth when it comes the the mounting tabs breaking and the bouncing. Also, can you run the Halo rings and LED's to the DRL's? and if so I wouldnt assume they would still work at night...?

hey btw there chamilton.
for one.
the mounting tabs are reinforced and work perferctly.
and 2 the bouncing? i have none. my lights work amaing, hell of alot better, id buy again from dash z racing ANYDAY 110% its just my dumb ass fault putting the damn wiring wrong. so i gotta tear em back out and wire them correctly, thx god i saved the other bulbs haha, now ill be rocking wit my gtp =)
thx there guys.

oh and chamilton, check out this entire thread, because there is a completely review by spartan, took pix, and everything. and tell ya what
im buying led taillights from dash z instead of on ebay since they made me so happy.

Thanks for the positive review, Ive read all the other reviews and people still seem to have fixed feelings but I may take a step in that direction. I am also looking into taking apart my own headlights and putting in some angle eyes and wiring to the DRL's. Also are these halo rings very brights, ive heard a lot of people are disappointed about how dark they are. I am guessing they are not CCFL's...that my be the deal breaker right there. I want people to see my angle eyes during the day...

Originally Posted by Maloro619

hey btw there chamilton.
for one.
the mounting tabs are reinforced and work perferctly.
and 2 the bouncing? i have none. my lights work amaing, hell of alot better, id buy again from dash z racing ANYDAY 110% its just my dumb ass fault putting the damn wiring wrong. so i gotta tear em back out and wire them correctly, thx god i saved the other bulbs haha, now ill be rocking wit my gtp =)
thx there guys.

oh and chamilton, check out this entire thread, because there is a completely review by spartan, took pix, and everything. and tell ya what
im buying led taillights from dash z instead of on ebay since they made me so happy.

Well yes alot of people have mixed feelings very true.
so if i understood correctly. i gotta put the (hid converison kit bulbs) inside of the light where the black looking eye is correct? not where there is just the shiney chrome reflecter part right? *QUICK REPLY WOULD BE AWESOME*

There are two halo rings correct? Put the H3 HID kit into the outer halo facing away from the center of the car. The one that's right near the orange reflector. The chrome reflector is NOT where you want the H3 bulbs. You want it in the Projector housing part.

DashZ i am interested in getting a pair of these headlights for my gtp was just wondering if you still had the special headlights hid and shipping price.

Yeah my H3 converison kit is in the housing closer to the middle part near the grills, soo i need to switch them around, so i havent been using my lights to often till i get time which tommorow ill be switching them around, so just to make sure this is correct.
the h3 (converison 6000k ones) go in the outter (left) in the black type projection glass holders right? (that look like black eyes)

Hope this clears it up:

nawarkk: Thanks so much for helping people in this thread, I'm really appreciated it.

Maloro619: If you have any question about the installation, please feel free to contact us at 1-877-641-4829

valdezh74: if you still want to get these headlights, please PM me since this group buy has been ended.

Originally Posted by robstout

Can i still get the projection lights at the group price? If so how much for the smoke projection lights with hid kit, hid fog lights, smoke led tail light kit? Thanks

Yes, you can still get the projector headlights, LED tail lights and HID kit from us.
Please let me know what housing is the projector headlights you are looking for, same as the LED Tail lights, and HID kit
so if I am correct, you want to the following items right:
1. Projector Headlights (I need to know if you want chrome or black housing)
2. HID Kit for the low beam of the Headlights (I need to know what K you want to get, we have 4300K, 6000K, 8000K, 10,000K, 12,000K)
3. LED Tail Lights ( we have red housing, black housing, chrome housing available now)
4. HID fog lights (please let me know what light bulb your fog lights is using now, then I can find you the correct HID conversion kit)

please let me know your decision and what's your shipping address and I can quote you the best deal.

Thank you.

got them today

kinda lame ? but do u have to buy the hid kit for these or can i use regular halogens