Bogging under boost

Quote:

---

Originally Posted by Regalgse00

Ok. So I have taken off the belt and I can give her hell. I already disabled the Bbv and plugged the vac line to it and still no change. I have tr6 plugs 55 gap. I have a 3.2 on it now. But will do it with any pulley size. I used to have a adjustable fpr and got rid of that and got a stock one so I can still use my AN fittings. The intercooler I got was from sseilmnop. One of his recent ones. And it didn't have the holes for the pcv. So I tapped my valve covers and ran a catch can

---

if the intercooler you got from sseilmnop was a newer one, it would have the pcv holes in it.

Well just set up how the vacume lines would be for stock. Tomorrow I'm going to take out my fuel pump and check that plastic venturi hose and replace if with a rubber hose. I emailed zzp just to see what they would say and they said it sounded fuel related. And they had a gtp with similar issues cause the cup was going empty starving it. So I'll just double check.

And the intercooler does not have the holes

every pic ive seen of his ic's have holes for a functioning pcv. i find it hard to believe it dont have them.

I'm postive I have no Pcv holes in it. If I could upload this pic I'd prove it. But I no for a fact it doesn't