Can the OBDC2 port be tested?

[Sudden]

I plugged in my Aeroforce gauge and it didn't light up. I figured it was broken. I want to use my Torque Ap to scan for KR until I get a working gauge. I plugged in my PLX Bluetooth device and it doesn't work either. Has anyone had a problem with the ODBC2 port? Is there a fuse related to it?

[BillBoost37]

Add ignition on power to your gauge and move the little thing that connects the pins properly for adding power externally.

[Sudden]

I thought about that, i no longer have that plug that came with the gauge.

[BillBoost37]

Not my problem. I tell you how to fix it.. not what to throw away.

[BillBoost37]

fwiw.. the power is the center pin. but you better make sure that other thing is right before you plug it in

[Sudden]

Not my problem. I tell you how to fix it.. not what to throw away.

Miss placed!

[Sudden]

fwiw.. the power is the center pin. but you better make sure that other thing is right before you plug it in

Do I need to ground it with that plug? You mean I had better move that jumper?

[BillBoost37]

I'm telling you to find the instructions.

[Sudden]

I can do that.

[Sudden]

Now, how do I get the port working to use my bluetooth?

[BillBoost37]

fix your cigarette lighter fuse

[Sudden]

OnStar/Diag fuse.