Thread: Gen 1 zzp billet fuel logs bolt source

So I see these attach to the valve cover, meaning I would need longer valve cover bolts am i correct?
I did find longer bolts but not sure how to take the sleeve off the stock valve cover bolt that holds the grommet without breaking it

thanks

the bolt just taps out of the sleeve. never had a problem just laying em upside down on the vise and popping the bolt out with a small screwdriver and a tap with a hammer

Thanks I will try to swap them out tonight

yeah..."try"

if you cant dont bother coming back

lol

James..I'll ban him if he doesn't succeed

Cmon now I been doing pretty well all these years figuring crap out on my own.....
i just need to make sure im not doing everything the hard way again!

So I was able to work this out with the correct bolt size and type. If anyone else has these relics laying around , PM me I'll dig out the bolt info for you
The valve cover bolts I used a pressed and a old exhaust stud from the head - popped out like butter. Don't trying pulling it out using vise grips - doesn't work.