Lmao this build is getting silly - Everything Ive ordered comes from like a China sweat shop
how can it be possible to have a 1 shorter valve spring then the rest ? (130s) it's not as short as a stock spring but not as tall as the rest of the 130s
|
|
05-16-2015
Lmao this build is getting silly - Everything Ive ordered comes from like a China sweat shop
how can it be possible to have a 1 shorter valve spring then the rest ? (130s) it's not as short as a stock spring but not as tall as the rest of the 130s
05-16-2015
Where did you get those from? That looks like a good .2" shorter lol.
Jeff
05-16-2015
Can't remember zzp or intense. It measures about 54mm vs 58mm
05-16-2015
I would definitely send it back. But I would also test all the others to make sure they are in spec as far as spring rate and pressure at installed height. If you dont have the gear to do it, I can if you like.
Jeff
05-16-2015
that will change the spring load quite a bit because the installed spring height lb will change so much.
05-16-2015
That's why I also suggest checking the rest of them as well, to me the rest are suspect too.
Jeff
05-16-2015
Got it all figured out and making it right!
seems there was a 105 sent along with the 130s - I checked everything else and it comes up perfect
thanks
05-16-2015
Cool, at least you caught it before you installed them.
05-16-2015
For sure. Mistake like that would have induced a catastrophic failureOriginally Posted by J57ltr
05-16-2015
oh that short ones for the pedestals you dont have to shim........ lmfao you mean these didnt come from zzp?
05-16-2015
Yeah. Word of advice to anyone - INTENSE not ZZP
my zzp heads are crazy hard to set up - took me all day with another $80 in tools I'll never use again lmao
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
