Hi, I am almost finished with my L67 swap in my 1998 intrigue, but I have run into a real issue. So far I have every wire connected to every sensor/plug minus the MAP sensor (adapter is on it's way) and when I hook the negative cable to the battery I get a big arc and if I tighten it down I get smoke coming from the engine harness plug that goes to the cam, crank and then the Ign control module. I tried some simple deducting like disconnecting the cam and crank sensor and leaving the ign control module still plugged in and it smoked. So I then took the old harness that has just the and plugged the old ign control module in and same thing smoked and got hot again. *Also engine will not crank. I don't know what to do any ideas are more than welcome. Thanks.