Duct tape the boot and be done with it.
Printable View
Duct tape the boot and be done with it.
^ Make sure to get black tape.
ive also heard of people using a flexible epoxy/silicone spray on cv boots to help them be more durable i believe VHT makes it...Quote:
Originally Posted by 01GTP
Duct tape? I never thought of that! LOL! That might be the right answer. At least till I could afford a new axle.
How do you get the CV axle out of the tranny? I figured it just popped out, but a buddy and I pryed on it pretty good (this is when I damaged the boot) when we had the side cover off the transmission changing the solenoids because we thought it might give us more clearance. (4t65e m15 by the way)
pull harder.
A chisel and a hammer. You need to shock it not pull it. It will pop right out.
i used a big crow bar for my axles when i swapped my tranny.
TMWQuote:
Originally Posted by Bio248
Quote:
Originally Posted by minichopper6hp
Oh, ok. I figured two guys prying on it oughta pop it out. When it didn't, I figured it must just be made different than what the Haynes manual showed. I was afraid we were going to break something else!