Thread: 95 Grand Prix GTP 3.4 dohc oil pan repair or replacement.

Car slipped on the jack as a result got a small hole in the pan. Best way to fix it, I have read that JB weld will work for awhile. How about pan replacement anyone do the job. I would rather not pull the pan. I also have a rack leak to.

The pan replacement isn't too bad if you have a way to lift the engine a little bit. JB weld works too but you use JB weld on a very coarse prepped surface and then I'd do fiberstrand body filler over that with urethane sealant to seal it all up.

Originally Posted by Sven The Sexman

The pan replacement isn't too bad if you have a way to lift the engine a little bit. JB weld works too but you use JB weld on a very coarse prepped surface and then I'd do fiberstrand body filler over that with urethane sealant to seal it all up.

I have an engine hoist, so I can lift it up. What do you mean by fiberstrand body filler. You mean the bondo with the fiberglass hair in it.

Originally Posted by 67GTO

I have an engine hoist, so I can lift it up. What do you mean by fiberstrand body filler. You mean the bondo with the fiberglass hair in it.

Yessir.