Thread: Best place to get ported Gen3 blower housing?

When I do my SSIC installation soon, I am getting tempted to throw a ported blower housing on as well. Figured I would use my current rotors/mod. pulley setup. Anyone have a good recommendation of where to look for one, or how to do it myself or have it done? Testing the waters here. If anyone is selling one, let me know.

Thanks in advance!

I have one that I'll never use. But the basics are having the blower outlet in a perfect "v". Then porting the roof of the inlet, and smoothing the floor. Opening up the inlet for a Bigger tb is always an option. One could even use those universal EBay throttle bodies off eBay for ls1's.

Originally Posted by 91parkave

I have one that I'll never use. But the basics are having the blower outlet in a perfect "v". Then porting the roof of the inlet, and smoothing the floor. Opening up the inlet for a Bigger tb is always an option. One could even use those universal EBay throttle bodies off eBay for ls1's.

Well, I guess I am forced to ask... How much for yours??

Ironically that is my plan. Obtain a ported housing and match it up with an LS1 throttle body. then I can throw it on top of the SSIC and do the full install at once. Weather is starting to get pretty cold so probably going to try to acquire some parts over winter and maybe a beater civic then do the build in the spring.

Text me @4044219498 shipping will be on your side, I'll get a quote Monday or tuesday . I'll clean it up and grab some pics for you. It was my original blower of my gtp.