Thread: Pics..Help me find cause of oil leak.leaking on side of passenger tire behind engine

Hi and welcome back to YOUR thread! My apologies for hijacking it (borrowing it sounds better...lol). Yes, I'm sure it isn't the sensor. I really wish it was the sensor because it's sooo much easier and cheaper to replace that than anything else that could be leaking oil.

I would say those would be fine to use, a little rusty or not. A few of my tools look like that, too, because I have 3 sons who like to "borrow and not wipe off and return tools" to where they got them from. LOL

Ok guys/gals fixed the oil sensor. Working good no leaks

Good to hear! In the process of moving, haven't gotten the chance to pinpoint my leak, but maybe someday.......

Put a dye in the oil and you'll find it

my car is all good once changing the oil sensor. No more leaks

Well, I'm FINALLY ready to do this oil pan gasket and motor mount! Seems like it's been forever waiting for the time to get to it, with moving and all, hopefully this weekend or next, really depends on if my sons have to work this Saturday or not.

Anyway, just wondering if I have to put rtv on it or not? I got the felpro gasket that comes with the plastic windage tray, the gasket is rubbery-looking and blue. I asked the guy at the parts store and he said no.

I've watched a bunch of videos on doing this pita job, is there anything I should be made aware of before we get ripping into this thing? lol

I love the fact that I've got 3 strong, young sons that like to borrow money from Mom and when the time comes to pay me back, it's usually "Well, Mom, umm, errr". LOL That's when I pull my trump card and remind them that they can pay me back by installing things on my car for "free labor". Hey, it's a win-win situation...... They don't have to pay me the cash back and I don't have a huge labor bill at the local shop.

Nobody can tell me if I need to put any type of RTV on with the new gasket/windage tray?

Ok, thank you.

Got plenty of cleaner and rags for this job...lol. Thanks.

Originally Posted by Scottydoggs

..

We update on my status. Oil light came on. I checked the oil it was below the cross hatches on the dip stick where it says to add a quart. i was like I hope the oil sensor isnt leaking again, i checked it out and it was not. I put alot of miles on my car well over 6k since august when i changed the oil and sensor so maybe I burned a quart or 2 off

i added a quart of oil and it brought to within the cross hatch marks right int he middle. Oil light didnt come back on so i figured it is ok and i dont need to put any more oil in it.

Is it normal to burn a quart or 2 within 3 or 4 months of 6,000 miles worth of driving? When I put a quart in, it brought the level to the middle of the cross hatch

Originally Posted by Fivefingerdeathpunch

Gm says 1 quart in 3,000 miles is normal.

I wouldnt go 6k on a oil change regardless, unless you are running a full syn. Both conventional oil and filters arent made to go that many miles.

Fill it up to the top dot every time, which is 4.5 quarts during an oil change.

Originally Posted by ITHURTZ

yes its normal, even newer vehicles the factory says losing 1 qt in between oil changes is acceptable... that is pathetic.

Thanks you all. so that would make sense. I have went roughly 6k miles so far

I dont change my oil every 3k mile usually at least 6k miles or more with good high mileage oil. Oil these days are much better then decades ago and we no longer need to change oil every 3k miles