Thread: Cold Start Stalling

Results 1 to 6 of 6
  1. #1 Cold Start Stalling 
    Donating Users NaturallySmashed's Avatar
    Join Date
    Mar 2009
    Location
    Medford, NY
    Posts
    576
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Hey everyone,

    My car has always had an intermittent problem with starting. Sometimes it will start normal and sometimes I have to gas it for 5+ seconds to keep it running. It seems to be happening when the engine is cold, when the engine is warm this problem rarely happens.

    I have cleaned the throttle body, changed plugs and wires, cleaned IAC valve, cleaned MAF, fresh filter, and pcv valve. I do not have vacuum leaks.

    I'm thinking even thought I have no DTC's I should replace the IAC valve. Should that be the next step?

    Thanks in advance.
    Reply With Quote  
     

  2. #2 Re: Cold Start Stalling 
    Turbo is the way to go. BillBoost37's Avatar
    Join Date
    Jul 2009
    Location
    W Spfld
    Posts
    26,833
    Thanks (Received)
    53
    Likes (Received)
    90
    Dislikes (Received)
    1
    Step 1: Please educate us on what you drive. Currently..I assume Yugo
    Step 2: Unplug maf with ignition off, start car a few times until the pcm seems to have learned and is running well. Then tell us if that makes it start better overall.
    I drink..so consider that when reading my posts.

    2010 Audi A6 Dual IC's
    Reply With Quote  
     

  3. #3 Re: Cold Start Stalling 
    Donating Users NaturallySmashed's Avatar
    Join Date
    Mar 2009
    Location
    Medford, NY
    Posts
    576
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    i thought i had a signature. it's an 03 gt. Step 2 didn't affect the way it starts. I started it about 10 times and let the idle smooth out but each time I had to put my foot on the gas to start it.
    Reply With Quote  
     

  4. #4 Re: Cold Start Stalling 
    GT Level Member RedneckGTP's Avatar
    Join Date
    Oct 2012
    Location
    Chelsea, MI
    Posts
    225
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    do you have good fuel pressure? does it hold the pressure or does it drop off to nothing pretty fast after running? codes?
    Reply With Quote  
     

  5. #5 Re: Cold Start Stalling 
    Donating Users NaturallySmashed's Avatar
    Join Date
    Mar 2009
    Location
    Medford, NY
    Posts
    576
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    it holds the pressure, don't know if it's "good" pressure. No codes. I just replaced the IAC valve for 21 bucks and so far it seems to have fixed it. I'll have to update again tomorrow because the car may just be too warm now.
    Reply With Quote  
     

  6. #6 Re: Cold Start Stalling 
    Donating Users NaturallySmashed's Avatar
    Join Date
    Mar 2009
    Location
    Medford, NY
    Posts
    576
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    starting up just fine now... looks like IACV was the culprit
    Reply With Quote  
     

Similar Threads

  1. RE: Stalling @ startup (cold only)
    By pbxcomm in forum 3.8L V6 Naturally Aspirated (L36)(L26)
    Replies: 4
    Last Post: 04-30-2012, 07:54 PM
  2. Replies: 1
    Last Post: 02-08-2012, 10:09 PM
  3. Overkill PCM now Stalling rough start
    By kyleinkman in forum PCM Tuning
    Replies: 19
    Last Post: 10-25-2011, 07:26 PM
  4. Rough Start/Stalling Issue
    By Bigg Dogg in forum General Tech Discussion
    Replies: 5
    Last Post: 08-18-2011, 07:08 AM
  5. 97 GTP - Rough idle, stalling after start?
    By Psyk in forum 3.8L V6 Supercharged (L67)(L32)
    Replies: 6
    Last Post: 01-29-2010, 09:08 PM
Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •