Thread: Mods needed for 3.5 S/C pulley?

Originally Posted by REDCOMPG

"Should" be but again for the 1 millionth time you need something to scan for knock. What works for one car doesn't mean it'll work for other cars. Without scanning you really dk where the motor is at. I would not even touch the stock pulley until you have something to scan with unless you enjoy changing it and when you chip a piston I'll be the first to say I told you so.

What he said. All of our cars act differently even with the same mods

Lol I'll find something to scan it with. How would the process go? Would I scan it before or after I install the pulley?

There isn't a set rulebook saying if you have these mods then you can run this pulley they are more like good starting points

Alright. I'll find something to scan it with. I'm guessing I would scan before I install the pulley? Or after? What would be the process?

You will actually have it scanning during startup, while driving etc etc

For some reason, it didn't show that I posted the second to last one.. I feel dumb lol

Thank you guys very much for your input on this. I've learned a lot and will update on how everything goes! Peace