Thread: Replaced blend door actuators, now temp is correct but there's a creaking sound

Results 1 to 6 of 6
  1. #1 Replaced blend door actuators, now temp is correct but there's a creaking sound 
    Donating Users
    Join Date
    Jan 2013
    Location
    Huntsville, AL
    Posts
    55
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Hi all,

    As the title says, I recently replaced both blend door actuators (digital climate control) with Dorman 604-106 as they had broken gears, were clicking, were setting off 05 and 06 errors on the CJ2, and were failing to provide the correct temperature mix.

    This has solved my temperature and CJ2 error codes.

    However, now there's an intermittent, frequent, kind of quiet but definitely audible creaking, back-and-forth type sound coming from behind the dash. I tore it apart to find that it's both the driver's side and the passenger side actuators moving very slightly against the HOT side stop. They just keep hitting it, moving very slightly, and making this odd crrr-prrr sound.

    It's not a huge deal as the air temp adjusts perfectly through the full range (I can watch the actuators respond from stop to stop every time), but I'm curious, and it can be annoying.

    I already tried the 'learn' procedure of Auto mode on, disconnect battery, wait 2 min, plug in battery, ignition to ON, wait 2 min for calibration (I watched the system move the actuators to the stops successfully), key off, start engine, wait 2 min, test. They still work perfectly, and still creak.

    I'm stumped, guys. Is this typical of the aftermarket Dorman replacements? I've found new OEM ACDelco ones online, but they're $91 apiece and are obviously flawed (plastic gears, metal shaft) anyway, which is why I went with Dorman in the first place. Don't really want to spend on those if I can help it.

    What do you all think?

    Thanks,
    Komrad36
    1998 Grand Prix GTP. Open cone intake, ZZP downpipe, dogbone flip.
    Reply With Quote  
     

  2. #2 Re: Replaced blend door actuators, now temp is correct but there's a creaking sound 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    try un hooking the battery for 30 minutes, that may reset the actuators.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  3. #3 Re: Replaced blend door actuators, now temp is correct but there's a creaking sound 
    Donating Users
    Join Date
    Jan 2013
    Location
    Huntsville, AL
    Posts
    55
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Thanks Scottydoggs!

    I did as you suggested. After reconnecting the battery, I turned the key to ON, without starting the engine, and watched the CJ2 move the actuators back and forth from stop to stop, then settle in the middle.

    However, both the driver's side and passenger's side actuators still do the creaking. I took a closer look and it's not intermittent so much as almost constant. Just slight twitches back, forth, back forth - short pause - back, forth, back, forth.... any time the ignition is on. Even when the CJ2 is off! In addition, I found they don't just do it at the stops. They will do this back-and-forth at either stop but ALSO anywhere in between if I set a corresponding temp of 70-75 or whatever. So it may not be the actuators themselves. Idk. Something is commanding them to just constantly move back and forth slightly, even when the CJ2 is turned off.

    Any ideas anyone? Thank you all!

    Komrad36
    1998 Grand Prix GTP. Open cone intake, ZZP downpipe, dogbone flip.
    Reply With Quote  
     

  4. #4 Re: Replaced blend door actuators, now temp is correct but there's a creaking sound 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    mine were doing that some time ago. did the reset deal, seemed ok, then it came back and stopped all on its own. maybe they will work themselves out.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  5. #5 Re: Replaced blend door actuators, now temp is correct but there's a creaking sound 
    Donating Users
    Join Date
    Jan 2013
    Location
    Huntsville, AL
    Posts
    55
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Roger. It's not critical and they otherwise work perfectly
    I don't want to lube them and risk breaking anything. If it ain't broke...
    I may try reset again or something. I'll post back if anything works or self-fixes haha - though it's been doing this for a solid year.

    Thanks again
    1998 Grand Prix GTP. Open cone intake, ZZP downpipe, dogbone flip.
    Reply With Quote  
     

  6. #6 Re: Replaced blend door actuators, now temp is correct but there's a creaking sound 
    GTP Level Member nik12937's Avatar
    Join Date
    Oct 2010
    Location
    Pennsylvania, USA
    Posts
    668
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I feel like you'd be safe using a dab of a silicon-based lubricant, on the hinge or the stops. Silicone doesn't react with many things compared to other types of lube, it just get washed away easily. Shouldn't be a problem since the actuators are inside the car.
    Reply With Quote  
     

Similar Threads

  1. Blend doo or Blend door actuator?
    By Logan541 in forum General Tech Discussion
    Replies: 9
    Last Post: 06-10-2014, 02:29 PM
  2. Blend Door Actuator or Temp Controls?
    By lemkeant in forum General Tech Discussion
    Replies: 19
    Last Post: 04-23-2013, 07:04 AM
  3. Replaced temp sensor, now temp gauge stays pegged high...
    By DarkLord in forum General Grand Prix Discussion
    Replies: 11
    Last Post: 04-10-2013, 06:53 AM
  4. Blend door acuator , 2 ,one on each side of the dash, correct part #?
    By fhaines in forum General Tech Discussion
    Replies: 5
    Last Post: 04-30-2012, 12:05 PM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •