Hey guys, new to the forum and want to get to know everyone. I have an 04 grand prix gtp, but am working on a friends 01 with the 3.1. Knock sensor code p0327, sensor is good with 100k ohms resistance to the block, wire has 3 ohms of total resistance from pcm to knock sensor with no short to ground, and last but not least at the pcm connector with the terminal removed there is .05v. Replaced the pcm since all powers and grounds I found on the pcm connectors were good. Still throwing the code after driving 50ft. I think I am missing some small detail and it is kicking my a$$. Please help me... Thanks, Convert92.
