Upper dogbone flip any techniques

**jayroca** · 12-06-2013

I've attemped to try and flip my dogbones but its not working sprayed wd40 let it sit and still it wouldn't budge and flip any suggestions guys?

Sent from my SAMSUNG-SGH-I747 using Tapatalk

**Bluemagic** · 12-06-2013

Spray more. Like a lot more. Took me forever and then when it finally flipped it ripped lol. Had to go buy new ones and start fresh

Sent from my HTC One using Tapatalk

**Iceman6669** · 12-06-2013

Try rocking them slowly back and forth while trying to spray WD-40 around the mount.

**Nates94** · 12-06-2013

Spray more rock it around and spray more. Took me a while to get mine. Do it slow so they dont tear.

**231FUN** · 12-06-2013

Yup, soaked mine twice and used a couple longer wrenches for leverage and flipped them slow no problem.

**Bio248** · 12-06-2013

smash the mount in a vice and turn the housing around it. took me 2 minutes to do both of them.

**jayroca** · 12-06-2013

Originally Posted by Bio248

smash the mount in a vice and turn the housing around it. took me 2 minutes to do both of them.

Sounds like a plan

Sent from my SAMSUNG-SGH-I747 using Tapatalk

**Below Average Joe** · 12-06-2013

^^ you are so cool

**Jomamma** · 12-06-2013

Use a flat head screw driver to pry it from the housing and spray wd40 in there on all sides, all corners.

If its properly lubed you really shouldn't have a problem. Just go slow.