So how many hours away is that? Weren't you talking about having ZZP so work for you anyways...your going to have to drive there so what's the difference?
Drive drive drive their not going to come to you!
|
|
08-01-2013
So how many hours away is that? Weren't you talking about having ZZP so work for you anyways...your going to have to drive there so what's the difference?
Drive drive drive their not going to come to you!
Last edited by REDCRAPGP; 08-01-2013 at 04:48 PM.
08-01-2013
If you haven't found someone in the area that does work on a 3800...
Then you aren't looking.
You're in the friggen GP capitol.
08-01-2013
I drove almost 3 hours for my tune. Worth it IMOOriginally Posted by ngj123
08-01-2013
2.5'' downpipe to stock cat, u-bend deleted, no resonator, 06+ impalla SS catback
SD headers, no cat, no resonator 06+ impalla SS catback(needs resonator to stop the rasp)
here is the sd headers idling when engine/exhaust is completely cold(40 seconds in the idle slows down)
:4'' HAI\L67 HVTB\HV3\ER Rockers\WP underdrive pulley\Headers\cat delete\91 octane overkill incar tune.3.69 gears, Trans go shift kit.
08-01-2013
Those SD Headers sound gorgeous! Must buy.2.5'' downpipe to stock cat, u-bend deleted, no resonator, 06+ impalla SS catback
SD headers, no cat, no resonator 06+ impalla SS catback(needs resonator to stop the rasp)
here is the sd headers idling when engine/exhaust is completely cold(40 seconds in the idle slows down)
08-01-2013
U sure? Don't be switching up on us again!
08-01-2013
Well I figure I'm getting a lot more for my money by getting headers and they give me more capabilities down the road. I was mainly just worried of messing something up but I'm gonna try it
08-01-2013
Can't mess anything up really, just might take some time depending on your capabilities so worse case scenario expect your car to be down for a bit.
08-01-2013
I'm expecting it to take at least a weekend. I will probably be watching YouTube for help and also using google haha
08-01-2013
If you havent read billboosts easy header install thread I can try to find the link
08-01-2013
I'll look for it, thanks!
08-01-2013
Great write up! But what exactly is the engine lift bracket? And do I specifically have to have an O2 socket?
08-01-2013
Engine lift bracket is in the back of the header looks like a bracket lol. You'll see it if you look back there. Now a o2 sensor is needed you can just use a adjustable wrench
08-01-2013
Once I have the cam and that installed they already said they would do a tune before adding anything so yeah that is a given. Believe me when I say people around these parts do not know **** and it amazes me the lack of knowledge when it comes to car repair. I went around with a garage for week over a stupid thermostat.
08-01-2013
Sure does sound a lot better but did you notice any gains from it?2.5'' downpipe to stock cat, u-bend deleted, no resonator, 06+ impalla SS catback
SD headers, no cat, no resonator 06+ impalla SS catback(needs resonator to stop the rasp)
here is the sd headers idling when engine/exhaust is completely cold(40 seconds in the idle slows down)
08-02-2013
yep noticed alot more topend, and I already had a 2.5'' downpipe and u-bend delete. and im only n/a also
:4'' HAI\L67 HVTB\HV3\ER Rockers\WP underdrive pulley\Headers\cat delete\91 octane overkill incar tune.3.69 gears, Trans go shift kit.
08-02-2013
Why am I noticing when I start the engine, the SRS Airbag light flashes a couple times? I've never noticed this before. Does it always do that?! Haha
08-05-2013
Here's a video of the airbag light:
http://s1354.photobucket.com/user/2F...b6770.mp4.html
08-05-2013
as long as its off when the car is running id give 2 sh1ts.
08-05-2013
I don't want it blowin up on me when I'm driving down the road haha or it not to go off if I wreck
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
